Community Brag Posts

Large Rustic X Bench

Submitted by hannahclou on Sun, 06/12/2011 - 14:11

For my second project I wanted to build something a little more difficult than a shelf.  The hubby showed me how to use our power tools and I was unstoppable.  I chose this great bench because it fit the feel of our house and I wanted an entryway spot to sit while putting on shoes. 
The finishing took much longer than it actually took to build the bench.  I thought it would be more difficult to get the precise angle measurements  to make the supports under the bench, but it was not bad at all.  I can 't believe I built this pretty bench!  I have the building fever now!

Estimated Cost
$12
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Early American and Polycrylic for the top.
Antique White and Clear Gloss for underneath.
Recommended Skill Level
Intermediate

Comments

In reply to by mandylynn523

spiceylg

Thu, 08/18/2011 - 04:33

Hello. My hubby and I are in the process of building this bench. Basically just have to put the top on and finish the staining/painting. We are doing a black bottom and stained top. I have a hard time w/angles so my husband tackled that but I have to say, he had a hard time with it as well. Glad you had an easy time of it! Can I ask how you attached the top?

Classic Grey Fancy X Dining Room Table

Submitted by collins814 on Sat, 07/27/2013 - 19:56

I recently made the end table and console table from the "Rustic X" collection and those were my very first wood projects that I have EVER done. I think I am addicted now! I have had NO experience in working miter saws, kreg jigs and barely drills before this. If I can do it, anyone can do it :)

My husband and I made this table over a weekend and I am very excited about how it turned out. I was inspired by the color and size (and chairs!) of Sawgrasshomegirl "weathered grey fancy x farmhouse table with extensions" and I used the classic minwax stain. Thank you so much to Anna White and Sawgrasshomegirl for their plans, ideas, and inspiration!

Built from Plan(s)
Estimated Cost
$100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Pre-stain, Minwax Classic Grey and Minwax Polycrylic Protective Finish
Recommended Skill Level
Beginner

Comments

camkin02

Mon, 08/12/2013 - 20:40

Those chairs are beautiful(table also) where did you find them.

collins814

Tue, 08/13/2013 - 05:37

The chairs are from Pier 1 (Kubu hand-woven dining chair). They have a hint of grey in them too which I love!

Glider

Submitted by Seansg5 on Sun, 08/09/2015 - 20:24

The bench was easy to build with great instructions. I had Home Depot make my cuts for this first project and then I went and bought a miter saw and other power tools for future ones. So much fun. 

Built from Plan(s)
Estimated Cost
$100
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Comments

Cross35

Mon, 03/14/2016 - 08:35

Great work.  DId you do anything different to the swing itself?  How did you build the frame.  I'm looking to do this exact thing for my patio.  I don't have anywhere to hang the swing.

 

Thanks for sharing any info.

mbarland

Sat, 06/13/2020 - 16:54

Made the chair and then built the glider frame for it just eyeballing the picture. I can't figure out how to upload a photo of my design, but can try to describe it.

I made mine with a 4x4 on the base of each leg, but a 2x4 would work as well, it was just what I had on hand. The base board on each leg I made 48". From there I put two 48" vertical boards. The vertical boards were centered and from the front edge of the first board to the back edge of the second board. Two 16" boards were then used at the top and bottom of the vertical boards to hold them in place. Cap it off with a 30" board on top of the verticals. This is where you'll attach your eye bolts. I put both eye bolts 3 1/2" back from the front (a scrap of 2x4 works well as a guide). To join the two legs, I used two 52" boards on top of the base 4X4 of the verticals (one in front of the legs and one behind).

Around the corner, outside

First of all, sorry for my english, i'm french and i don't speak english often in life, so i don't know now if i still speak and write it well enough to be understood.

 

We needed some space outside our appartment to room bootles.

When i found the plans on this website i decided to start this project.

It was the first time i used my device "undercaver jig" to assemble or link all the wood pieces together.

Once all the "wooden wall parts" made, i strated assembling the whole wooden furniture.

Then i painted them and once the paint was ok, i protected the wall furniture (painted parts and unpainted parts) whith an uncoloured protective product.

After that the inside was done to be able to store milk and water bottles.

 

The last part to be done was the upper part. I decided to make it in 4 indepedant concrete parts to be abble to replace it in case it breaks.

Estimated Cost
150 Euros
Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Intermediate

Jewelry Box

Submitted by Anonymous (not verified) on Fri, 04/22/2022 - 07:56

Made from Pencil Cedar from a tree felled at our church.
Finished with Danish oil

Comments

Crib for Ella

My husband recently designed and built our daughter's crib. After looking online and measuring another crib to make sure he had the rail spacing just right he came up with a plan and built it over a few weekends. He also built the changing station and will later build an armoire for her room as well.

Built from Plan(s)
Estimated Cost
$250
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Rustoleum American Walnut on rails and frame
Minwax Gunstock on oak plywood (head and foot)

Recommended Skill Level
Intermediate

Comments

Pabs

Tue, 07/30/2013 - 18:53

Beautiful!, I've been searching the web for plans to build a crib and haven't found any, would you mind sharing yours?, I think it looks amazing!

Yellow Queen Headboard - First Project

Submitted by jbl02a on Sun, 06/19/2011 - 18:41

My first woodworking project. Found the instructions very easy to follow. Took me a couple weeks because I only had a few minutes to work on it at a time. Biggest issue was I happened to have picked up a few warped boards.

Estimated Cost
$75
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Behr primer and paint in one. Color is "Honey Pot."
Recommended Skill Level
Beginner

Comments

Potting table

This is our version of the potting table all made with free materials. We love it!!!

Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Teak stain
Recommended Skill Level
Beginner

First Coffee Table

Submitted by anmillard on Tue, 08/18/2015 - 21:39

Inspired by the Pottery Barn benchwright square coffee table, I made this approximately 36'' square with one large drawer.

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Rustoleum Dark Walnut stain with Minwax Satin Polyurethane
Recommended Skill Level
Intermediate

Comments

New side table for our guest space

Submitted by Tbacks on Sat, 03/17/2018 - 04:57

I was making a set of side tables for my daughter and decided to make an additional one for our spare room/guest space.  I love to try new wood treatments so I used Apple Cider Vinegar applied with a steel wool pad on this table.  Let the steel wool soak for about an hour and then applied.  Sanded after dry to even out the finish and then applied a gloss finish to give it a beautiful shine.  

Built from Plan(s)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Apple cider Vinegar applied with Steel Wool Pad
Recommended Skill Level
Intermediate

Farmhouse Dinner Table

Farmhouse Table Plans. 8ft long, Antique Walnut Stain. Absolutely adore!

Estimated Cost
$75
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Antique Walnut
Recommended Skill Level
Starter Project

Comments

Rachel Horschler (not verified)

Mon, 12/10/2012 - 10:11

Thanks for posting the pictures!! This is really close to what I had in mind!

Fancy X Farmhouse table with built in copper cooler

Submitted by J Dixon on Sun, 08/23/2015 - 01:54

My version of Fancy X Farmhouse table with a built in copper cooler!!

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Dark walnut colored danish oil base with satin poly top coat.
Recommended Skill Level
Intermediate

Comments

Codding58

Thu, 05/12/2016 - 12:27

VERY nice build!   How did you make the copper cooler, if you don't mind me asking.    Great Idea and love that you can hide it away!  Cheers

Media Stand

Submitted by Anonymous (not verified) on Sat, 04/23/2022 - 21:16

I made the speakers to go with it.
by Paul

Library Book Cart!

Submitted by vpihoney on Mon, 06/27/2011 - 07:14

I built the library book cart to organize all my toddler and preschooler's books. What we were using just wasn't cutting it; the books end up being scattered everywhere. I love the idea of a pretend library cart (I used to work in one...), and the kids can feel like they have the library in their room! They're playing "library" as I type!

This was an easy build. I used 1 1/4" screws for the 2-in castor wheels for 3 out of 4 screws per castor where I had enough depth. I also used wood glue. For the 4th screw per castor, I used 1/2" screws. This was mainly due to being all I had on hand...not sure if it was correct. We'll see if the wheels hold up with the weight of all the books! Other than those changes, I followed Ana's plans.

Oh, and I managed to create handles without really knowing what I was doing! They turned out OK. I tried two different methods for each handle, but basically used a drill, chisel, and jigsaw and then sanded, sanded, sanded after I made the cut. I think I can do better next time!

Built from Plan(s)
Estimated Cost
30
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
I used a spray primer in white and then painted a leftover semi-gloss finish in an eggshell color using a roller and paint brush.
Recommended Skill Level
Starter Project

Comments

tonjacoy101

Mon, 06/27/2011 - 09:13

Your library cart looks great! Good Job. My daughter loves playing with hers too, and the best part is how easy they are to put away :)

Apothecary Media Console

Apothecary Media Console Table. No modifications to plans.

Built from Plan(s)
Estimated Cost
$200-$300
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Dark Walnut Stain, Rustoleum red spray paint, and Minwax Finishing Paste Wax. I stained the bottom trim and top board. I then spray painted 2 coats over all visible MDF surfaces. I sanded the spray paint and used the stain to glaze all visible surfaces. For the false fronts, I stained them first. I then rubbed soap (standard hotel soap) all over the fronts, heavily coating the edges. I then spray painted them red. Using a large chisel, I chipped off the paint around the edges, distressing where I thought appropriate. I glazed back over the paint with the Minwax stain. I stained the wooden knobs. I finished by applying the clear paste finishing wax all over and buffing.
Recommended Skill Level
Intermediate

4x4 Truss Beam Table Black

I had trouble with the angled cuts not fitting perfectly. I have a circular saw, not a table saw or miter saw, so I had to measure with a protractor and mark, then try to follow my lines exactly. Tedious, but I like the table. It is mad heavy though!

Built from Plan(s)
Estimated Cost
$30 for stain. I had all the rest of the reclaimed wood. Otherwise, $150.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax "ebony"
Recommended Skill Level
Intermediate

Comments

Shoe Dresser with Extras!

Submitted by Anonymous (not verified) on Sun, 04/24/2022 - 11:30

We added a bit to your shoe dresser plan. We ended up building into the wall since it had the perfect little indent and put a baby cabinet in the middle so we had access to the outlet. 

by Angela

Built from Plan(s)