Search Results

… pocket hole screws.  Place pocket holes on side of cabinet that barn door will cover. … Drill 3/4" pocket holes on each end of each shelf.  … sides and dividers with 3/4" brad nails.   … The height of your barn door will depend on your barn door hardware and how it is … Read More
Project Plan
… size and build your drawers after hardware installation.   Attach the door rails to the stiles with ¾” pocket holes and 1-¼” pocket hole … back to the doors with ¾” brad nails and glue.   … Hang doors with 8’ barn door hardware kit.   … Simplified 8' Barn Door Console Plans … Read More
Project Plan
… doorway opening. Then subtract 1/2" from height and width for a door that will have 1/4" clearance on all sides. … Once you have these measurements, you can determine the length of your door rails and stiles as shown in diagram. Remember that most 2x4s are 3 1/2" wide - so subtract 7" from the width of the door to get you 2x6 cuts. … Now build the doorway out of 2x4s and 2x6s … Read More
Project Plan
… next. A then baby Grace rubbed toothpaste all over the bathroom door, so now I needed to sand the dried toothpaste off and restain the door, and then clear coat all of the doors. Yeah, that didn't happen right away, and she got to her bedroom door with crayons.   Fast forward to today, and pretty much every doorRead More
Blog Post
… brad nails. I also recommend adding some 2" screws. … Build the barn door with 3/4" pocket holes and 1-1/4" pocket hole screws.  Cut the 1/4" … feet long. Cut the 23" piece down in length to fit on the back of the barn door. Add the back with 3/4" brad nails and glue. … Add the … Read More
Project Plan
… and cut out the openings. If you are careful about cutting out your door, you can use the door scrap to build your door with. Attach the plywood to the stud wall using 1 1/4″ nails and … Read More
Project Plan
… fit the base, and nail and glue with 1-1/4" brad nails. … Build the barn door frame with 3/4" pocket holes and 1-1/4" pocket hole screws. Lay the … Use 3/4" brad nails and glue to secure. Install on the cabinet with barn door hardware. You can make your own barn door hardware following … Read More
Project Plan
… baseboard cut out if not removing baseboard). … Build the center console using the same construction methods as the towers, but also … wood filler and let dry.  Lightly sand.   NOTE: Depending on your barn door hardware rail attachment bolts/lags, you may need to add additional … Read More
Project Plan
… Inspired by your Barn Door Console - Barn Door Kitchen Cabinets … Read More
Brag Post
… Measure and cut the front.  Nail and glue the front piece on. … The door should be built to fit the barn door hardware.  This is the dimensions that we used for our door with our homeade hardware (tutorial coming soon!) … Barn Door Cabinet with Mini Fridge and Microwave … Read More
Project Plan