Chest of Drawers

Difficulty
Beginner Projects
| Print this plan

Chest of Drawers with deep drawers

Plans for a chest of drawers with two small and two large drawers.  Measures  50 inches at the widest point, 19 inches deep and 40.75 inches high.

Download the plans here

Preparation

Common Materials
2 inch screws
3/4 inch finish nails
wood conditioner
paint
paint brush
Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Kreg Jig
Drill
Circular Saw
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Finish Used
Minwax Pre conditioner, two coats of Minwax Classic Gray and two coats of Satin Poly
Project Type
Room

Comments

11soccer

Sun, 03/22/2015 - 16:45

on this chest of Drawers, why are the instructions, not showing up? it only reads "step 1, step 2" w/ no actual details. I cant figure how to open these....