Craft Room Storage Tower
Make a very tall and extra room storage tower complete with modern style doors! These DIY plans will add lots of storage to your space. Can be made with glass doors too! Full free plans you can follow to make your own.
2 – 1x12 @ 8 feet long
1 – 1x12 @ 10 feet long (cut shelves from this board)
3 – 1x2 @ 8 feet long
3 – 1x4 @ 8 feet long
Hinges – either euro face frame mount or standard side mount to be mounted on exterior of cabinet.
1 ¼” pocket hole screws
2” and 1 ¼” finish nails
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
2 – 1x12 @ 92 ¾”
6 – 1x12 @ 19”
2 – 1x2 @ 92 ¾”
1 – 1x2 @ 17 1/2”
1 – 1x4 @ 17 ½”
1 – ¼” plywood @ 92 ¾” x 20 ½” OR Double face frame
2 – 1x4 @ 91”
6 – 1x4 @13 ½”
5 – ¼” acrylic glass @ 15” x 15”
Build the box as show in the diagram. You can use either pocket holes or 2" screws or even finish nails, as this project is fully face framed for extra support on front and has a back.
Attach back, using it to square up your project. Also attach to all shelves for the greatest support.
Front trim can be nailed on or if you have a pocket hole jig, you can build the front face frame first, and then attach as one piece.
Add the remaining pieces for the front face frame.
You will need to construct the front door with pocket holes.
If you are using glass or acrylic glass, attach with mirror hooks or glue. You can also use 1/4" plywood for the backs.
Door is attached with hinges. The easiest method is hinges on the outsides.
You may need a clasp to keep the door shut.
This cabinet MUST be secured to a stud in the wall behind as it will be very top heavy to prevent tipping.