Farmhouse Table

Submitted by CLieLee on Sat, 06/22/2013 - 14:11

This was our first project. A bunch of "nfl widows" decided to make these tables together. While building with friends is fun, doing all the cuts and prep work for three tables at once will take forever!

If I did it again:
1) Let your wood fully dry out before laying the top boards - it will warp and lift a bit
2) Stain the top and all sides of the 2x6s - if they do warp you don't want to see unstained wood
3) Be extremely careful with your glue - stain will not stick to glue
4) Wood filler does not stain the same as the wood and you will be able to see it
5) Attach your end boards to the 2x6s first. Otherwise they will tend to sag and tilt down.

Estimated Cost
90
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Ebony Stain - Minwax with two coats of semi gloss sealant
Recommended Skill Level
Beginner