Rustic Console - my first project
Rustic console -first project..plan on adding X to ends
Left the shelves as is since the wood was so pretty
The rest is a combo of vinegar stain, then a custom mix of gray paint wash and emerald green...♥love it!.
Rustic console -first project..plan on adding X to ends
Love love love how this table and benches turned out!
I made 4 of these chairs for around our fire pit. I chose to sand stain and poly before assembling and plan to add another coat of poly now that they are assembled. Sanding was the longest part of the process for me, but if you aren't as particular as I was about the finished project the time investment would be substantially reduced. I also of course had drying time for the stand and poly. Assembly itself was simple and the finished chairs are comfortable and sturdy without being overly heavy and bulky.
I had been wanting to build a mantle for quite a while but couldn't decide what I wanted it to look like, then I saw the wood mantle with hidden storage plans on Ana's website. I used a steel wool\vinegar mixture as a stain, 3 coats making sure it dried completely before applying the next coat. I finished it off with a beeswax & orange oil wood polish & conditioner. So far I'm storing the remote for the fireplace, the key to the gas for the fireplace and the tool that helps remove the front of the fireplace in there. I'm not sure what else will find it's way in there. I'm very happy with how it turned out.
Julie V.
This was my first project in regards to building anything. I had some old milled wood from my grandfathers farm that needed some attention. The wood itself was milled about 60 years ago and sat under his house in a crawlspace ever since he moved from his farm in Kentucky to the city of Atlanta, Georgia. The wood itself was in rough shape and since I didn't have access to a planer, I had to sand the rough cut wood to the smoothness of my liking. I was very limited to the amount of wood I had so I took various ideas from your website and came up with my own version. I would not have even attempted the project had I not been inspired by your site. Overall I was distracted numerous times by life so it took about 6 months to finish. Speaking of finish, I highly recommend testing several large pieces of scrap before staining. I went with a driftwood color to a weathered grey before I finally finished with a darker kona color. By the time I was done, I had sanded the table 3 separate times. I love the table and made it to where I can remove the legs for easy transport. It is solid as a rock and very heavy.
I used Ana White's awesome design, but needed access for my printer scanner combo, so I modified the design and created sliding shelves. I also substituted a sheet of butchers block for the top in lieu of plywood.
Thank you for an incredible design, that has been used by at least 3 of my friends because they loved mine so much!!
Hey Ana,
I saw your raised bed planter and decided to tackle it for ourselves. It measures 2'x8' and stands 28" to the bottom of the planter. I used redwood fencing for the sides and bottom at a cost of $1.79 each. I didn't use the wire mesh for the bottom but drilled 1/4" holes in the redwood fencing for drainage.
Thanks for the idea!!
Mike Howell
Great plan, I used knotty pine boards for the entire build, including glue up for 2x4 pieces. And the hooks came from a recent visit to England. The wood was reclaimed from a tear down of our family cottage. Using the material gives our new home a sense of history.
5 board bench with a few extra boards.
I had some leftover hardwood flooring pieces that i cut for the seat of the bench. I love color so this was a lot of fun!!!
Thanks!
another clara table and chair.
Wed, 09/16/2015 - 07:46
I love that you put a bench with it. I need to build one for my daughter.
I tried to replicate the original post on this site (which is awesome by the way!) I did make a few changes so this might help others:
1. Made total table length 72" to fit our dining room.
2. Flipped the stretcher boards towards the inside part of the table for more leg room while sitting on either end of the table
3. 2 inch pocket hole screws to attach table top to the frame (instead of 2 1/2 inch so they wouldn't go through the table top)
4. Two 2x10s (instead of 2x8s) for the breadboards. For extra support, I used four 3 inch metal brackets (purchased at Lowes) that I painted white and attached under each breadboard (8 total brackets used- 4 under each side)
5. Olympic brand latex white eggshell paint for the legs/apron for the table and bench. I then applied 3 coats of Minwax Polycrylic Matte (water based) to help protect the water based paint.
6. To help with the gaps between the boards that create the table top (I have two kids so you can imagine the crumbs!), I used Dap white caulk in between the boards and wiped away the excess. I then proceeded with the Rust-Oleum chalked ultra matte white paint (using 1:1 ratio of water and paint) to create that lighter foundation for the next step.
7. After using the Minwax Dark walnut stain 2716 (one coat), I used 3 coats of Minwax Fast Drying Polyurethane clear satin to finish and loved the result.
For this project, I made the headboard from the Farmhouse Bed plans. I omitted one of the 1x6 slats to fit to my metal frame. I made two planked wood bedside tables with shelves and I created a lift top bench that was inspired by both the bed, and the side tables. Finally, I threw together a blanket ladder using 2x3s.
We just purchased a rolling island to replace our old kitchen table. We wanted to make stools to fit under it properly at the right height. We used all recycled wood and it’s painted with and exterior black semi-gloss paint that I had on hand that I use for my outdoor barn quilts. I covered it with 1” foam, a layer of Dacron and some off white(to match our kitchen cupboards) heavy vinyl. We really like our new look❤️Thank you Ana for sharing all of your plans. We are going to be using more in the future. I just know it.
Mississippi Lakeside Creations.
Here is my very first project.
Loved Ana's original of this and we saw cedar plans on sale over the holiday weekend we had to give it a shot. Loved how it turned out. Thank you for the inspiration.
I wanted this console but not as long.
My dad and I spent 2 weekends making his and her Adirondack chairs for my husband and I and a matching side table!
Simple dresser plans modified to use 6 drawers. Made with Ash wood and clear poly to finish.
Lori Tabor
I made this without the fancy headboard, but I'm very happy with how it turned out! See my blog for complete details.
My daughter is finishing her last week of preschool. I wanted to make a small "thank-you" gift for her 3 teachers. I pieced together different ideas from ana's site and other places on the Internet. The printout is from shanty 2 chic's website. I created 3 boxes using 2 six-foot cedar fence panels. I cut mine down to size based on the dimensions of the flowers I used. Drilled a few holes on each edge and used 1/4" sisal rope to make handles. Used hemp to tie the label's to each box. Each box took approximately 15 minutes to make. Including the cost of the flowers, each box cost less than $5 too!!
All scrap lumber was used on this, cost was $0
3/4 plywood 2'x4'
1x6x24"
1x4x24"
1x2x13" front trim
Mon, 08/29/2016 - 08:29
My son loves horses, so I made him this Horse Wall Hay Feeder to keep with the theme but where he would have a place to put his babies! :)
Comments
Ana White Admin
Thu, 05/15/2014 - 10:35
Great First Project!
Love the finish and decor! Great job on your first build!