Community Brag Posts

3 Seat And Loveseat 2X4 Outdoor Couches

Submitted by jerryo on Mon, 06/03/2019 - 19:39

Used Redwood and Kona colored stain. This is my first wood project and Ana really inspired me in being able to complete this. Thank You Ana all the way from California! The Love Seat was easy to modify from the original 3 seat plan.

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Rustoleum Kona
Recommended Skill Level
Beginner

Comments

jerryo

Thu, 06/06/2019 - 11:40

hard to believe, we found them on the Big Lots website...$40 a set back and cushion. We looked everywhere for an affordable option. These look great and are really comfortable..!thanks for the compliment : )

Jerry

Reclaimed TV console

Submitted by Anonymous (not verified) on Thu, 01/21/2016 - 10:24

Built this TV console from reclaimed pallet wood. Added some tiny hairpin legs for more of an industrial look.

Estimated Cost
$150.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Hand rubbed clear wax
Recommended Skill Level
Advanced

Easiest shelf ever

If you need a shelf/ledge, this is the plan for you - regardless of your building ability. Easiest. plan. ever.

And if you are like me - you won't even have to make any cuts! We have this ledge in our dining room along the long wall. it gets decorated for each season and it's GREAT! We love showcasing family photos as well as our holiday decor.

Wood, glue, nails or screws. Paint. Done! It's that easy!

Built from Plan(s)
Estimated Cost
$10
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Sherwin Williams Dove White paint
Recommended Skill Level
Starter Project

Palette Mud Kitchen

Submitted by Anonymous (not verified) on Fri, 05/05/2023 - 03:16

Here's the Mud Kitchen I made for my son's kindergarten. All made from palettes. Unfortunately your plans came out just too late

Built from Plan(s)

Comments

Kids Step Stool

My sister wanted a step stool for her grand-daughter via her daughter-in-law. Like our mother and grand-mother before us, we stood by the sink with our hands in the wash water "helping" with the dishes. She asked it I could build a stool. After searching through several plans, I came across this vintage step stool and changed it up a little for the personal touch. I added the cartoon characters to fit with my great-nieces theme and she now has something that she can "brag" about as she grows.

Estimated Cost
Less than $20.00
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Minwax Oak stain, Minwax Provincial stain, latex paint for cartoon characters and 2 coats of Minwax Polycrylic. When using stain, I prefer to wipe on with old rag or t-shirt, it seems to cover better. As far as with the acrylic, I use a foam brush going with the grain whenever possible.
Recommended Skill Level
Beginner

Pantry Cabinet

Submitted by JoanneS on Mon, 03/05/2012 - 16:57

Pantry cabinet, with lots of room, Ana-inspired. We combined ideas from the Momplex kitchen, simple armoire, and benchmark storage, and we are super pleased with how this turned out. We built it in 2 pieces, attached together and then secured to the base and wall studs so it’s a ‘built-in’. Then we added lots of trim and painted to match the dining room. The opening at the left is large enough to fit pretty much any size microwave, and there’s a dedicated outlet behind it in the opening. The shelves are spaced wide enough apart for tall cereal boxes, tall bottles, and chip bags to stand upright. Overall finished cabinet size is 48" wide and 95 3/4" tall. This took us several days to complete. Since the doors are tall and kind of heavy, we added the Blum cabinet door dampeners from Rockler (these things really work!). Ana, thank you so much for the inspiration. I don’t think we would have tried this if it wasn’t for you. We love our new pantry!

Estimated Cost
$600
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Ace Royal semi-gloss in Wishbone (front and bottom side), and in Crushed Peanut (upper side). We did 3 coats, sanding in between coats.
Recommended Skill Level
Intermediate

Comments

Debi_G (not verified)

Wed, 03/07/2012 - 00:05

Fantastic!

yogashell

Sat, 07/21/2012 - 07:44

It looks amazing! What a great idea to add it as a built-in. Nice modification for the microwave.

Modern Farm Bench

This was my first Ana White build, and I’m hooked. Super simple for a beginner to make. 

Built from Plan(s)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Minwax walnut stain
Recommended Skill Level
Starter Project

Outside table with built in cooler

I made this table for a friend of mine. I'm a Realtor and he used me to help purchase his home. Instead of a boring house warming gift, I made him this table instead! 

Estimated Cost
$75
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Colonial maple stain.
Recommended Skill Level
Intermediate

Outdoor Play Kitchen!

Submitted by Anonymous (not verified) on Thu, 12/28/2023 - 08:57

We modified Ana White’s excellent Mud Kitchen plans, adding a third section and scaling the whole thing slightly larger to be a better size for our 4 and 6 year old grand daughters. It was so much fun to make and accessorize!

Built from Plan(s)
Seasonal And Holiday

2x4 sectional outdoor sofa

Submitted by Anonymous (not verified) on Tue, 05/12/2020 - 08:10

My first Ana White project. My friend Shelley and I are RN's, and she got me hooked on woodworking. I started with cushions from Lowes ( in the sizes that you recommended)to see if I loved the sectional for a few years. I loved it so much I decided to have custom Sunbrella fabric ones made. Even though the custom ones were more expensive, it has been worth it. They go perfect with my California Mission style home. Now I want to add the armless one and make it a U-shape. I did add a piece at the bottom back of each sofa to hold the cushions in. The seat cushions would slide out the back when sitting on the sofa. I made the coffee table to match. Our family loves it!

Estimated Cost
building materials for sofa $250. Custom Sunbrella Fabric cushiosn $2000
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Stained with Carrington Minwax and sealed with spray Shellac
Recommended Skill Level
Beginner

Comments

Stone Fireplace Entertainment Center

Submitted by Anonymous (not verified) on Sat, 03/02/2024 - 11:14

We took out the tv entertainment cabinet and built a frame for a 60” electric fireplace. We found the ledger rock to match the wall I completed two years ago and then I tiled the rock over the backer board and installed the fireplace. The wood on top of the fireplace came from an oak tree that was growing through our deck. I milled the wood and joined three boards to give me the depth I needed, sanded, stained and put a poly finish on it. Love the final result and we gained 6” of space in the room.

Wes Silvey

Patio Makeover

Submitted by Chris 1975 on Sun, 06/29/2014 - 08:47

This is my 10ft long picnic table (which is bar height) that we built for the patio. We needed better seating for parties and BBQ's. I will post the plans later! Also featured is the couch that we designed and built with the center table.

Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
minwax stain
Recommended Skill Level
Beginner

Comments

Princess Castle Bed

Submitted by ajjasser on Mon, 09/03/2012 - 22:00

Thanks to Ana White and fsmumford, I was inspired to create a castle bed for my princess. It was a lot of hard work but it paid off seeing her going up the stairs and down the slide a million times the 1st day!

Estimated Cost
Around $500 painted
Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Intermediate

Comments

NicoleStruck

Mon, 01/11/2016 - 07:13

Have you found the plans yet for this bed? I would love to make this for my daughter's new room, but I can't seem to find them either :[

Joey Oc

Thu, 11/26/2015 - 15:49

Thanks  so  much  for  being  so  generous  with your plans. I just  had  my  first  granddaughter  and you've  given  me so many options  for  what  I can do for  her. The castle bed will be great  in a few years. Thank you.

Joshnewton

Fri, 06/17/2016 - 17:52

Is there any plans i can get you to send me? I am building my daughter a princess bed and would love to see your plans.

 

THanks for your help.

 

JOsh #struggling dad

Three birdhouses

Submitted by Maribel on Mon, 07/07/2014 - 08:15

Our first plan from Ana White. It was really easy to follow and this was a fun project to do with the children. We used pine wood because it was cheaper than cedar, so we will try to not put them directly under the rain.

We were able to make two birdhouses in removing .25 inch in one birdhouse. We used wood we already had for the third one.

We let the children added some details to the birdhouses. Because of the birds we want to attract here, one hole is 1.25 inch and the other two are 1.5 inch.

Estimated Cost
$1.50 per birdhouse for wood
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
The children applied acrylic paint and we will add varnish before to put them outside.
Recommended Skill Level
Beginner

2x4 outdoor couch

Submitted by Anonymous (not verified) on Sat, 07/18/2020 - 18:46

I used cedar and added the extra boards so the cushions would stay put. We also made the arms 2x6 boards so we wouldn’t need end tables for the couch. The plans were super easy to follow. I mostly used pocket holes so the screws wouldn’t be visible. Love how it came out! Thank you for the plans, Ana!!

Built from Plan(s)
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Nothing yet. Deciding on whether to let it grey on its own
Recommended Skill Level
Beginner

Fancy Farmhouse Bench

Submitted by Varonec on Mon, 07/20/2020 - 06:40

Made this for the mud room. Been wanting a place to sit while we put our shoes on and take them off. This was a mod on the 63" version of the Fancy Farmhouse bench. I saw a mod similar to this but even more reinforced supports. I used Pocket holes for this first time with the project. from a distance you can't see the covered up screws on the top. I dunno if this was the best way but I wanted a solid connection for the bench and it's legs. instead of a bottom support beam I went with 20" diagonal 2x4's so we could put our shoes underneath the bench.

Built from Plan(s)
Estimated Cost
50
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Ebony Stain
Recommended Skill Level
Beginner

Double Chair Bench

Built from plans from diyPETE.com.

One day project (another day for poly)

 

Estimated Cost
$100
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Minwax Wood Finish penetrating stain: Gunstock 231 (2 coats), Minwax Helmsman Spar Urethane. (3-4 coats)
Recommended Skill Level
Beginner

Built-In Bed with Trundle Drawers

Submitted by Anonymous (not verified) on Tue, 12/06/2016 - 18:05

My oldest son's room is only 97 square feet. We needed to add the maximum amount of storage in the small, awkwardly-shaped room. My husband and I decided to make a built-in bed using a couple of stock cabinets to flank the bed. Using Ana White's plans, we made 3 rolling trundle drawers to go underneath. 

Estimated Cost
Cost for the trundle drawers, themselves, with the hardware was $14.00 per drawer. The total cost for the built-in bed, trundle drawers, and 2 cabinets that flank the bed was $480.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Painted
Recommended Skill Level
Intermediate

Comments

Back