1. Home

Community Brag Posts

Rustic Bar Stools

I needed new bar stools for our new bar that we designed and built in our basement family/entertaining room. Regardless of where I was looking, these things are silly expensive. I also wanted a little more of a country/rustic look that would suit my husband and my likes. I used the Vintage Bar Stool plans but my husband isn't a small guy and we have friends that aren't classified under the small frame category either, I needed more structure. After thinking about it for a few days, I liked the rustic X look and used that from so many plans. I also am all about comfort and the padded upholstered seats was a must. Can't wait for my next project. BTW. The cabinets behind the bar also came from here I simply modified for what we needed. We get compliments on it all of the time. Love this website, thank you so much for making simple to read instructions for things I actually want to do. 

Built from Plan(s)
Vintage Bar Stool
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Early American
Recommended Skill Level
Starter Project

Comments

Dadbuildsstuff

Thu, 12/26/2019 - 03:49

These look great.  I think that I'll add them to my build list that my wife seems to keep growing for me.  How did you attach the back pieces?  In the original design it showed pocket holes, but I don't see any on your work.  Thanks for the help.

Tim

Big kids picnic table

Submitted by Anonymous (not verified) on Mon, 05/03/2021 - 08:14

Hello from London, UK.
Used 120grit sandpaper and stained with Ronseal 10 Year Exterior Satin Woodstain 750ml Natural Oak

Built from Plan(s)
Big Kids Picnic Table Plans
Estimated Cost
£120
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Ronseal 10 Year Exterior Satin Woodstain 750ml Natural Oak
Recommended Skill Level
Beginner

Comments

Paper Roll Dispenser

Submitted by vendo on Wed, 11/17/2021 - 10:44

This took me about 20 minutes! I love the look of it and that it can just be left out when the kids aren't doing art. A great little item to add to keep the kids busy and inspired. I made a couple of mods from the plan. I used glue and nails instead of pocket holes and I did that bottom board flat instead of on it's side. I also used a little bigger dowel, and bought two rolls of paper on Amazon for $14.I'm giving this to my daughter for her birthday with some fun art supplies, so I think it's a great gift idea for any occasion for those crafty people out there!

Built from Plan(s)
Craft Paper Roll Holder

Comments

Monika

Tue, 04/02/2024 - 06:09

Sometimes, when working with papers, you might need to convert file formats, right? So, I recently came across this website https://pdfflex.com/webp-to-png It's super handy for converting. It's been a real time-saver for me, especially when I need to tweak documents for printing or sharing. I'd desided to share in case it helps someone else out there too!

MODERN SLAT TOP OUTDOOR WOOD BENCH

This was my first project. I am pretty excited how it turned out. If I did it again, I would recommend sanding and painting prior to building.

Blog Link
MODERN SLAT TOP OUTDOOR WOOD BENCH
Built from Plan(s)
Modern Slat Top Outdoor Wood Bench
Estimated Cost
$60
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Valspar Spray Paint - Oasis
Recommended Skill Level
Beginner

Comments

Lounger Sofa by Mark

Submitted by Anonymous (not verified) on Fri, 10/07/2022 - 09:11

Just wanted to share the results of the sectional I built with your plans. 

I’m new to woodwork, newly retired, built these for my daughters, with a twist, she wanted a lounger sofa, hope you like. 

lounge sofa

outdoor lounge sofa

Built from Plan(s)
One Arm 2x4 Outdoor Sofa - Sectional Piece

Comments

Outdoor Sectional

Submitted by KristenP on Thu, 06/06/2019 - 18:00

We built Ana’s outdoor sectional in a few hours and it’s made a huge impact on our deck! It saved us so much money but looks like a high end piece! Thank you for the simple and structured plans!

Blog Link
House of Picketts
Built from Plan(s)
2x4 Outdoor Sofa
One Arm 2x4 Outdoor Sofa - Sectional Piece
Estimated Cost
$200
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Cedar Stain
Recommended Skill Level
Beginner

Comments

Raised Planter Stand

Submitted by Anonymous (not verified) on Sun, 04/30/2023 - 13:02

Created the stand for the raised planter using 2X2 assembled using dowels. Painted the stand mixing black with a bit of white to simulate metal. The actually plastic window box fits within a wood open box with mitered corners fir clean log. Bottom of the stand provides a shelf using (9) 2X2s with a dado placed on either end to fit on the runners of the stand.

Built from Plan(s)
Small Raised Planter Stands

Comments

Cedar Fence

Submitted by jvos on Wed, 12/04/2013 - 06:04

I've needed a new fence for years but was intimidated by setting posts. I decided this year to hire someone to set the posts and then build the fence myself. Then I saw a brag post on here where the person used Oz-Posts. After researching it, I decided this was the way to go. It was simple and fast! We obviously need to cut the tops off the posts yet!

Built from Plan(s)
Cedar Fence
Estimated Cost
$900 - 70 feet of fence
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate

Easy to Build Workbench

Submitted by Anonymous (not verified) on Thu, 08/17/2023 - 13:40

Easy to build workbench. I added an extra 2 1/2 inches (width) to the top plywood cut. This gave me a 1 1/4" lip to the front and back sides. I wanted to be able to clamp on all sides of the bench. Also added casters since I wanted to use this as an outdoor table for entertaining if needed and to simply have mobility with the bench. So far I love it!

Built from Plan(s)
Easy DIY Garage Workshop Workbench

Wooden garden tools storage shed

Our last project was building a tiny garden tools storage shed. We used only 1 x 4 boards. We don't have any plans, but you can watch the entire building process on our YouTube channel. We are very proud of the way the project turned out.

Blog Link
www.workshoptherapy.com
Built from Plan(s)
Classic Shed Plans

Comments

Seasonal And Holiday
Spring
Summer

Cedar Planter for Pole Beans

Submitted by swhitead on Mon, 07/20/2020 - 10:41

Increased width of box to 46" by using 8 fence boards instead of 3. put base at 12" down, lined box with landscaping fabric to hold dirt. Created trellis with 1x2 boards with 10" long corner braces, spaced screws 6" apart around edges and weaved cotton thread to create the trellis. Used 12" scraps of 2x2 to create a "slot" inside the center of the planter to support the trellis. Added container mix and green pole beans started in egg cartons earlier in the spring.

Built from Plan(s)
Cedar Planters with 2x2 Legs
Estimated Cost
$35
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
None
Recommended Skill Level
Intermediate
Seasonal And Holiday
Spring
Summer

Rolling grill cart table

Submitted by kmatt55 on Sat, 10/18/2014 - 19:13

I made the countertop with 2 plywood boards screwed together and topped the stainless steel with heavy duty adhesive.  I adjusted the plans a little to accommodate my space.  Thanks for the plans!  It was a fun build!

Built from Plan(s)
Simple Rolling Bar Cart
Estimated Cost
$100
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Glossy black exterior paint
Recommended Skill Level
Beginner

Modern Dorm Mini Refrigerator Microwave Cabinet

Submitted by rachelcb on Sat, 07/31/2021 - 12:35

I changed plan to make deeper. I also modified the bottom trim and top. I put a ball bearing soft door drawer guide on modern door so it can slide back and forth. I feel we need more modern plans on here but with a bit of creativity and using plans you can make anything. I have never built anything before. I love General Finishes Milk Paint in Snow White and I brushed rolled it on (sanded between 3 coats). It’s basically self leveling and leaves a nice matte finish. Used door glide in picture bought from homedepot in the 24 inch and that’s how wide door was and it was 36” tall. Door glide I only used one on top of the door not on bottom as well. Door piece of fiberboard with just strips glued on and quarters spacing them correct.

Built from Plan(s)
Barn Door Cabinet with Mini Fridge and Microwave
Estimated Cost
$200
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Dorm mini refrigerator microwave cabinet
Recommended Skill Level
Starter Project

Comments

Laundry Basket Rack

This was a great last minute Christmas gift. Took me a little over two hours. Made completely out if pallet wood.

Built from Plan(s)
DIY Laundry Storage Cart - Featuring Infarrantly Creative
Open Frame Laundry Basket Organizer

Comments

Resized modern chairs with table

Submitted by CarolinaL on Thu, 12/28/2017 - 16:27

I needed chairs that would fit on my narrow front porch. This plan was great because I was able to resize it to 20x20. I used 1x4s that I already had and some wood glue. They turned out solid. I made the tryde table with left over wood. That one is 17.5x17.5. Super happy with the results. We are doing the garage shelves right now. I have a list of other things I want to make thanks to Ana's wonderful website. 

Built from Plan(s)
Modern Outdoor Chair from 2x4s and 2x6s
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Exterior Valspar with a paint sprayer
Recommended Skill Level
Beginner

Patio couch

Submitted by Anonymous (not verified) on Mon, 04/03/2023 - 08:09

I have been looking at your blog and always been interested in making my own furniture. However, I was scared to try. Your diagrams and measurements were awesome. Thank you! Gave me the encouragement to try!

Built from Plan(s)
2x4 Outdoor Sofa

Comments

Back