Community Brag Posts

I absolutely loved this project! My first advanced' leveled project! I was afraid it would be to big for my room so I went 10" smaller in the width only. It surprisingly turned out well proportioned! Thanks Ana! I feel like a women with power!!

We made this a bit taller then the plan. But everything worked out well. It was our first project. I would NOT recommend this as a first project. Also, wipe the stain off quickly. We let it sit way too long and it came out very dark. It took us a long time to build because we both work. And, Home Depot didn't cut miters so we had to get a neighbor to do it.... fyi

I love it though.

Wife wanted bookcases for all our books and a desk/work area for her calendar.  I decided to modify the Channing Bookcase to suit our needs.  We built 5 of them to fit the wall.  We did not attach the back trim piece on the shelves to give them a recessed look.  Convinced the wife to let me buy the Kreg K4 system, which saved my sanity for the over 500 pocket holes we had to drill in this project. Thanks for the plans!

Built this gorgeous table from Ana’s plan. Had to build two more for my grands.

This was my first project! WIth some guidance from my husband, we were able to complete this during naptime (minus paint, of course). It was a fun project and I can't wait to try a different one! (Not sure why it looks so crooked in this picture! It looks nice and even in person.)

This was one of my first woodworking projects I completed with limited help from my handy husband. And the first time I used a jigsaw (to cut out the handles). I used mostly scrap MDF we had leftover from other projects - only purchasing one additional sheet of MDF for around $12. The MDF worked ok, but I did have some trouble with splitting when screwing it all together and screwing the castors on. Used our Kreg Jig where it made sense.

As a beginner, this project took me somewhere in the neighborhood of 16 hours over the span of a couple weeks. Cost was approximately $50 - including the MDF (but I used mostly scrap we had on hand), spray primer and paint, castors, and "Library" decal.

Those angles on the ladder are challenging. This is our first time building any furniture. Thak you Ana W

Thank you for the inspiration. In Australia I could not get the same size timber so needed to trim the sides. Next time will create the main frame and use it as a template. Made my own wheels, lock nut (also super glued) to ensure nut does not come off with little ones.

For my granddaughter and finished with Winnie the Pooh stickers.

A few years ago our family vacationed in Watercolor, on the northwest Florida coast. We loved the house we stayed in so much when we returned home we put our house up for sale so we could build a home similar to the one we stayed in. One of the features we loved so much was the large covered front porch and most of all the swing bed it showcased. My wife spent every morning and night that week relaxing in that swing. I promised my wife then that I would make sure got her own swing. Thanks to Ana White, she was back in her (new) swing last night.

I began with the "Large Modern Porch Swing" plan and made some changes. I wanted to use a twin size mattress so I increased the size of the swing's base. Also, because the mattress was 6" I lifted the arms and back. The arms are the biggest and best change I think. I had seen someone else do similar arms, but I they used an 1x12 I think. I wanted a heavier look, so I used a 2x10.

My Dad and I started with solid maple lumber. We altered the plan to use mortise and tendon joints and adjust drawer sizes to that night stands would not interfere with the drawers. Final product weighs about 500lbs.

This was my first time building something like this. I used reclaimed wood from my wife's family farm and decided to use thinner materials. I'm very pleased with the results.

I'm just starting out. I built this from scrap wood I had laying around. I followed the plan except for the table top. Here I used a 2x6 that I cut on the miter saw, and used bowties to help give the middle more strength.

Took about a week to build and put together. Most expensive part was the table legs but the most challenging part was to get the table top smooth and level. I built the benches based off the farmhouse bench plans and then picked up some chairs from a local second hand shop for just two bucks a piece. So far the feedback has been very positive!

This was more or less a honey-do project for my birthday. My husband was able to use the entire length of the original plan that was downloaded from this site. It took him the entire weekend to complete all of the cutting and assembly. the wood glue application and staining went well-basically, after the wood glue was dry he sanded then applied two coats of a stain that has a white wash appearance. After letting it dry he sanded then applied two applications of matte poly. This project actually took about three weeks for us because we were in the mist of moving. I believe it could have been completed in the course of one weekend if there were know distractions. The table is now a piece that is the conversation of all who visit our home and it will be in the family for many years to come.

This honey do project gets a 100% thanks to making this tool available to others!

Thank you

The Kelley's

Finishing products: minwax water based white wash pickling 32oz.

minwax water based polycrylic clear matte

The $200 dollars was due to other materials and tools that were required

This dining cart is very versatile. It could be used in any room of the house. I love that it has wheels on the bottom so you can move it easily if needed.