4x4 Truss Beam Table

Submitted by kmlimoges on Mon, 01/05/2015 - 06:39

First DIY. Took roughly 17 hours completed over 3 days. Used untreated pine from Home depot for top and untreated cedar (the only 4x4's available) for legs.

Total cost $270

Top stain: weathered oak (2 coats)

Top finish: Rustoleom polyeurothane clear satin

Legs: undercoat of Behr's Nautical blue and two thin coats of a white paint we had on hand. Then we distressed with an orbial sander and a 220 grit paper.

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate