Based on FatBobK2's design.

Submitted by Kougar1994 on Fri, 08/19/2016 - 15:30

This was based on FatBob2Ks great design.  I took iut the Xs used 4x4 legs and 2x6s fir the bottom shelf.  I also put a furring strip around the edges to hide the end grain and add some surface area.  I sanded starting with 89 grit, then 120 and finishing with 150.  For stain I used a rag to rub on General Finishes Java Gel Stain for 2 coats. it's really forgiving on bare wood and you don't need conditioner.  I sealed everything with Minwax satin poly wipe-on and did three coats.  

 

Built from Plan(s)
Estimated Cost
$80. I bought local lumber. The big bix stores just don't have straight boards unless you're buying S4S hard wood.
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
General Finishes Java Gel Stain and Minwax wipe on poly
Recommended Skill Level
Intermediate