![](/sites/default/files/60924510_10157257019691550_345434590300602368_n.jpg)
I Modified the plans to make the coop 4Ft wide to accommodate 4 nesting boxes. I Used roll away egg nesting trays in my coop. I keep the base pretty much the same dimension but made the planter smaller. I also replaced the 2"x 4" that framed out the house with 2" X 3". My chicken ladder is made from three 1" x 2". Because my chickens are so young I have the nest box blocked off until they are bigger. I will then use a hole saw to cut holes to each individual nesting box. I also added a Chicken Swing!
![](/sites/default/files/61003868_10157257019916550_6559248306122260480_n.jpg)
![](/sites/default/files/61274702_10157257019876550_3370224394373693440_n.jpg)
![](/sites/default/files/61599477_10157257019761550_6661047775590875136_n.jpg)
![](/sites/default/files/61689541_10157257019811550_1462584742523174912_n.jpg)
![](/sites/default/files/59697300_10157209977951550_9089045817980878848_n.jpg)
Built from Plan(s)
Estimated Cost
300-500
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate