Coffee table

Used the ideas from the kitchen island plan and coffee table plan to come up with a more elegant coffee table.

I made the legs from joined 2x6's cut down to 3x3. Mortised the rails in the legs for a really solid construction, and that way I could also eliminate any excess framing inside the table, and no screws. I was able to salvage all the wood for the legs and rails from a pile of scrap construction lumber.

Joined the top with fir strips between each 2x6 piece. The 2x6's and fir slats were purchased from a hardware store as I don't have a planer to clean up the surface of such wide boards...

Estimated Cost
$40-80
Estimated Time Investment
Weekend Project (10-20 Hours)
Type of Wood
Spruce, dimensional lumber, fir 1/4"
Finish Used
Minwax Red Cherry stain, white furniture paint.
Recommended Skill Level
Intermediate

Comments

Free Plans Made Possible By Our Sponsors