Thank you so much for this so easy plan! This was perfect! I shortened the overall length to 48" to fit our entryway. I got to make use of my Kreg Jig & was able to make use of upholstery fabric samples I had collecting dust. Used 3" foam covered with 2 layers batting, then put together the several samples into a color block setting. Stitched with french seams & squared off the corners before nailing down to the base. I didn't have a guide other than my eyes for the nailheads & chose to spread the 128 nails out every inch rather than closer...served to hide any waivering off & I preferred the look. I also found out that using a 2-sided tape like binding tape or Wonder tape for the cover was very helpful in keeping everything straight. The base is stained a dark walnut & finished with 2 coats of clear semi-gloss Varathane. The seat bottom is 5/8 MDF.
Tools used:
Circular saw
Sander
Pockethole Jig
Sewing machine & serger
Varathane Prefessional clear finish - semi-gloss - oil based - brushed on. Waited 24 hrs before light sanding & applying second coat.