![](/sites/default/files/8719C84E-B96E-48BE-9581-006F7444B9D2.jpeg)
Absolutely in love with this table. It turned out even better than we thought since this was my first diy project. We didn’t want to spend thousands of dollars buying a table similar to one we could make ourselves so we decided to give it a go. Our biggest issue with building it was the wood warping. We could only work on it every other weekend so the wood starting moving and it wasn’t on a flat surface. Definitely tie it down to a flat surface if you can’t build it all in a few days. We reinforced the breadboards with pocket holes on the inside and out because the first time we only did the inside, it snapped off. We used a lot of glue the second time around. Will definitely be making more tables in the future.
![](/sites/default/files/19604E9B-81A8-4B39-B24E-8CAB9E74E674.jpeg)
![](/sites/default/files/07094F19-FD29-4C75-A3FE-A36105EC078C.jpeg)
Built from Plan(s)
Estimated Cost
130$ Wood and materials
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
2 coats Varathane Jacobean, 2 coats water based satin polyurethane
Recommended Skill Level
Intermediate