This was my first project that I took on from this site, and I was very happy with the result.
I used the plans from the Simple Sawhorse Table, and adjusted to our needs.
The only real adjustments were instead of using a solid top, I used 2 2x10's. I also made the total length 90" on top.
Very great site, and hope to be building more soon.
Built from Plan(s)
Estimated Cost
$50
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
For finishing this project I sanded, then put a layer of Amber Shellac down. After that dried, I sanded with a finer grit. I then put a layer of rosewood stain down, and let it dry without wiping excess off. Finally, I sanded the entire table with 0000 steel wool.
Recommended Skill Level
Starter Project