Garage Shelves

Submitted by 2jel on Mon, 01/01/2018 - 10:17

My new garage shelves.  Not my first project, but I really liked the way they turned out.  Used 1/2" plywood at 16" width.   I attached the plywood with wood glue and 2" brad nails every 12 inches.  I used an impact driver to screw the 2x4 into the wall and to attach the vertical legs. Saved a lot of time and wrist fatigue.

Estimated Cost
Estimated Time Investment
Afternoon Project (3-6 Hours)
Type of Wood
Pine 2x4 and plywood
Recommended Skill Level