Mission Style Dog Kennel

This project was really pretty easy. The hardest part was holding the pieces just right so they ended up where we wanted once the kreg jig hole screws went in. Also, we had to be sure not to overtighten the screws and cause splitting.

 

We did have to make two adjustments to the plans. I think the first was a typo...where it says 2 - 1x2 @ 15 3/4" (door sides) they should actually be 1x3 based on the images.

The second adjustment was the plywood for the back 17 3/4" x 21" ended up too wide for the end to fit on, so we made it 17 3/4" x 20"

Built from Plan(s)
Estimated Cost
$100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Early American stain and satin polyurethane.
Recommended Skill Level
Intermediate

Comments

Knox11

Sun, 12/24/2017 - 17:17

This was my first wood working Project! I learned alot about what to do and not to do for future projects. We are excited about how it turned out!