Tiered Storage Unit

We recently decided to turn our bonus room into a Den/Play room for our energetic 20 month old son. It quickly became apparent that we needed storage... and FAST for all of those little toys that toddlers love so much.

I loved the idea of the 5' x 5' room divider cubby, but needed something that would accommodate the sloped roof. I modified Ana's plans to allow for a tiered storage option that would work with the roof line.

Cutting/prepping and assembling went quickly with the Kreg Jig. I prepped all the materials and assembled the unit in the room as it is quite heavy completely assembled. Cutting and Assembly took about 1 and 1/2 naps for my toddler (so about 3-4 hours). Sanding and Painting the following day took about another naps worth of time (2-3 hours).

The unit is still 72" tall at its highest point- and I modified the plans slightly to ensure that all cubbies would be a minimum of 13.5 inches tall/wide. After 2 coats of paint, it was ready to be mounted against the wall for safety. I installed 2 L brackets on the top and middle rows and screwed directly into the drywall- can't be to safe when it comes to toddlers and their love of climbing!

Cost Breakdown:

1 x 12 x 8 (6): 65.00
1 x 2 x 8 ( 3): 10.00

Low-Voc all in one Paint/Primer (Valspar) (Quart)- $2.50 (a paint department return area find!)

Total Project Cost (estimate) $80-90 (including screws, wood filler and supplies)

Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Valspar LOW VOC all in one paint/primer (semi gloss)
Recommended Skill Level
Beginner

Comments