This entire project was built with 3/4 MDF plywood. The lid is 3/4 MDF with sides routed for rounded edge for professional appearance. Inside the box are two friction hinges ( one on right and one one left) to support the lid.
On the bottom of toybox are four casters with mounting plates that attach to bottom. Two of the wheels have locks while 2 are 360 degree motion.
The paint is Signature Series and primer used is Kills high hiding low odor.
The letters on the front are 4 inch letters purchased from BIGLOTS. Holes were countersunk into the letters, screwed to front of toybox, and filled with wood filler.
I couldn't be happier with how this project turned out.
Estimated Cost
$50
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Valspar Satin Signature Series at Lowes
Recommended Skill Level
Intermediate