Patio Table

The free plans on this website are made possible with advertising and affiliate links.  Thank you for helping us keep plans free.

 

Difficulty
Beginner Projects
| Print this plan

Patio Table measuring 94 inches long by 49 inches wide. I made it this big so it can easily seat 4 people along each side and two at each end if necessary.

Patio table measuring 94 inches long and 49 inches wide.

I built with a slatted top to allow water to run off.

The underside of the top edging is 28 3/4 inches off the floor and so you may want to adjust based on the height of your chairs or benches.

Any questions then please feel free to email me at [email protected]

Download full plans here >>>

 

94 inches long by 49 inches wide

Preparation

Shopping List

Full shopping and cutting list included in downloadable plan.

Cut List

Full cutting list included in downloadable plan.

Cutting Instructions

Cutting list included in downloadable plan.

Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Kreg Jig
Drill
Miter Saw
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Project Type
Room

Comments

Linda7

Mon, 05/04/2015 - 16:14

Thanks for posting the link to your plans. This is certainly a wonderful, attractive, and strong table. Any family would be lucky to have one, and you've made it possible with your great plans.