Play Faucet

Submitted by Ana White on Wed, 12/15/2010 - 21:35
Difficulty
Beginner
| Print this plan

The play faucet can be made of wood too! Special thanks to Canessa for sharing her faucet that really turns and pivots!

Dimensions
Dimensions shown above.

Preparation

Shopping List

1x2 scrap
2x2 scraps
2" screws

Cut List

1 - 1x2 @ 5"
1 - 2x2 @ 4"
2 - 1x2 @ 1 1/2"
1 - 1x2 @ 6"
1 - 2x2 @ 3/4"

Tools
Tape Measure
Pencil
Safety Glasses
Hearing Protection
Drill
Power Sander
Drill Bit Set
General Instructions

Glue the faucet piece (2x2 @ 3/4") to the faucet arm. Use predrilled screws to attach the remainder of the pieces.

Comments

Erin (not verified)

Thu, 12/16/2010 - 01:09

Thanks for this. DH is in the process of building a play kitchen, and I've been thinking about a faucet. This is perfect. Thanks.

Jamie (not verified)

Thu, 12/16/2010 - 02:48

Just what I needed! Thanks, Ana! You could cut off the hard edges with a band saw if you have one, and make it a little more pipe-shaped...

mamma_joy (not verified)

Thu, 12/16/2010 - 21:16

What a cute idea, but I was distracted by something else. I have that same fabric! I'm planning to use it in my kitchen and to make a curtain for my kids' kitchen (now that my son ripped the oven door off while trying to stand up--particle board kitchen set, not an Ana design). Somehow I now love that fabric even more!

Christina (not verified)

Fri, 12/17/2010 - 12:50

Soo cute!! The play kitchen is what brought me to your amazing site!!! The first few times I starred at the kitchens I'd get all misty thinking of how much our daughter will love it for Christmas!! I looked for long time for the perfect kitchen! We're putting it together tomorrow & I can't wait! It'll be one project down ... many, many more to come!!! Thanks Ana!!!

Free Plans Made Possible By Our Sponsors