Community Brag Posts

This is a slightly modified version of the little helper tower, very sturdy design, i weigh 184lbs and use it to climb up to high places as if it were scaffolding. The modifications include making the sides the ladder and the ladder the sides, this allows for smaller hands to grip easier when climbing. It helps to mimic more a ladder design than climbing up the side. It also made for easier install of rungs for ladder. Screws go through the wood face into tge end of the rungs, then pocket homes were used for side supports which were larger woods pieces than the rungs  and pocket screws went from face of supports to the edge of the legs therefore no split out when doing pocket screws! All made from recycled wood from crates, dried and seasoned of course, if you use recycled wood it must be fully cured or it will warp and split over time.

I built this for my wife for Mother's Day 2016!  Also built the centerpiece box.  If you know how to use a miter saw, jig saw, and read a tape measure....then you can build it too!!  It was a lot of fun and very rewarding!!  Took around 25-28 hours to build and finish.  Let me know if you have any questions.  My email is [email protected]

Chicken coop I made to look like a little red barn complete with a working barn door. We have seven girls and they love their lovely barn home.

We built this fireplace where nothing existed before. The instructional video was very helpful. We are so proud of how it turned out.

We have been sleeping on a inexpensive platform bed for the last 7 years and after falling in love with this website (thank you Ana, I am constantly bragging and showing your website to others) I decided to build us a farmhouse bed as my first project. I started this project back in October 2011....yes it took much longer than expected, but I have 2 kids a husband (so make that 3), a full time career in the military and a house to maintain. That and we got the news I am pregnant back in Nov!!! The head board and foot board did not take long and luckily we had a very mild winter here in NC (boo to no snow though). I decided to save some work and money by reusing the slats and hardware from my old bed to avoid buying more wood or having to get a box spring for our mattress. Unfortunately, that was my huge delay, I cut and stained my sideboards, bought what I thought would be great bed brackets and found myself with a space that was to wide for the slats and on top of that my husband managed to loose one of my brackets. Needless to say, months of sleeping on a mattress on the floor with my head board and foot board on either wall mocking us every night due to my overwhelming frustration and fear of having a colossal headboard fall on me while trying to work. I called upon the assistance of a good friend of mine (Christie you are amazing!!) to come over while my husband was out of town in May (I figured this would be a good time to surprise him, plus keep his opinions from making things take longer). So lots of how the heck are we going to do this and finding out the bed frame brackets I purchased were not as strong as they appeared (they broke!!). We got some new wood for the sides and some long bolts to get everything together and worked a whole Saturday to get it complete. Added a few L brackets to get rid of the wobble and its sturdy as a rock! It may have its flaws, but I love it and don't regret any of the time and stress it took to build it. I now have a beautiful comfortable bed to sleep in every night to patiently wait for my third little girl to arrive. It should last us for a very long time especially since I made sure that it could come apart and go back together for any future moves the military may take us.

I cannot wait to start my next project.....and hopefully it wont take as long this time ;).

This was a project undertaken to facilitate my current pursuit of learning how to cook, but I think it will serve me well as I study, too, holding my textbooks up. It also let me experiment a little with staining and with using milk paint (which has NO VOCs but is kinda weird to work with). And it let me put to use some scrap wood that I think I was unconsciously saving for something special.

Because I had a scrap pile, screws, a few hinges, and the finishing products, this project was Almost free...I had to buy a narrow hinge ($1.50? I think?), and I chose to buy some pretty page weights ($3 including both pendants and the chain). So...not too bad, right? For a solid book stand that has meaningful beauty to me?

Ok, so this is all scrap wood. The stained pieces are maple leftovers from my cabinet project, and the rest is a mix of pine and poplar. See the dimensions in the last photo. The paint is Miss Mustard Seed Milk Paint in Lucketts Green, and the stain is Red Chestnut oil-based stain by Minwax. I finished the whole thing with one coat of wax buffed to a soft sheen (my new favorite finish).

I used a miter saw for my cuts and a router for the kickstand grooves, but really a regular circular saw would've worked just as well (or better, for the grooves). It took me several days to finish this project, but there's no reason it should take (someone other than me) more than an afternoon.

I turned some old oak shelves that I got from an estate sale into a 3' wide Scandinavian slat bench.

Made these two in about 3 hours. Instead of wood glue I used construction adhesive. Now to sand and stain then add cushions.

Madethe framed three shelf bookshelf with plans from Ana White. It was a gift for new baby in the family. I added a matching side table I designed based off Ana's plans! I used poplar 3/4" plywood, pine trim and poplar top for both pieces. Used Sherwin Williams Emerald trim paint in light green. Love the way these turned out!

Found this on Pinterest and FELL IN LOVE! I have 2 kids that are inseperable, ages 3 & 4, a boy & a girl. I had been toying with ideas for them about bunk beds or maybe some PVC forts. But when I found this, it was like everything in one. Let me also start off by saying, although I am artistic I have never used a single tool or built ANYTHING in my life. EVER.

The beds were surprisingly easy to build and are incredibly sturdy & strong. I followed the plan exactly except for the platforms. I made my daughter's huge. (The plan calls for 22", I made hers 50") My son's I made smaller b/c that wall is shorter & there wasn't enough space. So his is only 16" but it's still plenty of room to climb up & get into bed. They use her platform as a stage to perform on or a small play area.

I'm going to glue down padding to cover both platforms and all the stairs b/c my kids are small but rough & tumble and I can already see the hospital bills. But the bed is EXCELLENT! Surprised to see no one else has posted a brag for it!

Make this immediately! The priming, painting & building for each only took one day. ONE DAY! I painted the room, the trim, and made both beds over the holiday weekend (Labor Day, Friday-Monday). My kids are now the envy of every child (and adult) that we know LOL!

I built it for this specific space,so I ended up shortening the length of it but also made it wider from front to back. The original plans would have run into into the door that's to the right. My old coffee table sat here, so I went off those dimensions.

What I learned:
If you do decide to tweak the plan, be sure to take into consideration that a 2x4 isn't actually 4 inches wide. The same goes for 2x6's (the bottom two shelves are made of 2x6 wood).

Entertainment center with Bluray/DVD storage in the doors. Based on the Cynthia media stand by Pottery Barn. I drew it up to my personal preferences using Draftsight (free 2d cad software). Used 3/4" oak for everything except for a few trim boards. It came out great, we are very proud to call it our own.