![](/sites/default/files/17554580_444696062539751_4735910257222404454_n_0.jpg)
I modified the origianl plans by making the cabinet taller. I also built 2 cabinets and trimmed them both together to make it appear as if it is 1 giant cabient. It measure over 7 feet tall and just over 6 feet wide. I did add an additional 1x2 brace in the center of the cabinet to help support. I also cut an additional 1x4 to use a brace when anchoring it to the wall. I also chose to add an additional 2 trim pieces to each door because they are much taller than the original plan doors.
![](/sites/default/files/17498588_444696065873084_6274538464545991602_n_0.jpg)
![](/sites/default/files/17626247_444696119206412_9168122444591247420_n_0.jpg)
![](/sites/default/files/17458007_444696089206415_8762428928081848270_n_0.jpg)
![](/sites/default/files/17523298_444696092539748_1946527302856594932_n_0.jpg)
Built from Plan(s)
Estimated Cost
$400
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Varathane Stain, Weathered Grey
15 7/8" center to center cabinet pulls
Fully Inset, Frameless Hinges
15 7/8" center to center cabinet pulls
Fully Inset, Frameless Hinges
Recommended Skill Level
Beginner
Comments
mjackson41995@…
Mon, 11/30/2020 - 09:51
Excellent
That is beautiful! Excellent job!