Framing Upstairs Walls

The weather has certainly warmed up here, but with this storm of warm weather has come lots of white fluffy snow. We've been struggling just to keep the upstairs of the Momplex shoveled and ice free to get to the point of work, so things have not been moving along as fast as we'd all like.

But one thing we were able to get done was building the upstairs interior walls.

Momplex

Step 1 Diagram

Step 1

After much thought and consideration, with wide doorways, spacious baths, and easy walk in closets a main priority, this is the wall layout we finally all agreed on.

I am pleased to announce that we have lots of closet space!

The laundry can either fit inside the main bath or in the hall closet, or if one mom so chooses, a separate laundry room can be made in the basement.

Much of the upstairs room layout was determined by window placement on the exterior of the Momplex.

Make sense?

Step 2 Diagram

Step 2 Instructions

So with a freshly pressed room layout, it's time to frame the walls! First the layout is chalklined to the floor of the Momplex so we have guides for placing walls.

Then the walls are framed with a 2x6 wall down the center to provide added sound barrier between the two units. We used a framing nailer to attach walls, and stud length 2x6s to reduce cutting.

Step 3 Diagram

Step 3 Instructions

The framing nailer is nothing you want your fingers anywhere near. A trick is to use channel lock pliers to hold the board while you nail. Sometimes I even use this trick when working on furniture.

Step 4 Diagram

Step 4 Instructions

Once the center wall is raised, it's braced from both sides to keep it square unit the top plates are put on.

Step 5 Diagram

Step 5 Instructions

Walls actually make the rooms look bigger because you can get a sense for room size. The Momplex units are small, but definitely more than enough for Mom to live in comfortably.

Step 6 Diagram

Step 6 Instructions

After the center wall is framed, the smaller interior walls are framed.

Step 7 Diagram

Step 7 Instructions

Where the walls join, extra bracing is put in the adjoining wall to give you something to nail to, and a spot to end your drywall on. The top plates will overlap on top, further tying in all the walls.

Step 8 Diagram

Step 8 Instructions

We ended up not framing in the full bathroom walls because we want to make sure the tub will fit in first. Just to be safe!

Step 9 Diagram

Step 9 Instructions

Then the best helpers showed up.

Step 10 Diagram

Step 10 Instructions

For the last wall, the girls all pitched in.

Step 11 Diagram

Step 11

Now this is the part where you have to go from lifting up from the ground to re-positioning to pushing up over your head. You have to change your grip.

Step 12 Diagram