Submitted by arkep on Tue, 05/14/2013 - 19:19

I'm turning my messy sewing room into an organized craft/guest room, so I made a murphy bed to conserve space. I used corrugated tin on the the face of the bed so that I can use it as a magnet board while not in use as a bed.

Estimated Cost
$100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Polyshades Antique Walnut--two coats with light sanding in between
Recommended Skill Level
Intermediate

Comments

Julie44256

Fri, 05/17/2013 - 09:54

The estimated cost is $100, but the hardware linked from the original plan was over $300. Do you have an alternate method of mounting this?

arkep

Fri, 05/17/2013 - 11:23

I think that link was a suggestion if you want an assisted lift/lowering system, and that hardware is part of what makes regular Murphy beds so expensive. I just used door hinges--3 for $8. It's not that heavy to lift and lower the bed, in my opinion.

Julie44256

Fri, 05/17/2013 - 11:40

Thank you for your reply! If I make this project, I think I'll try the door hinges. It won't be frequently used (a few times a year) and I'm pretty sure we can handle the minimal weight for those few occasions.

P.S. I really like the styling with the wood and corrugated metal, it looks sharp!

iMark

Fri, 06/28/2013 - 20:02

thanks for sharing the murphy bed. have been looking for a space solution for my daughter's bedroom. the corrugated tin look sharp in this project--my daughter would like the corrugatged tin as well--except for hot pink stain on the cabinet.

anyone know where to get hot pink stain?

DorieM

Wed, 02/10/2016 - 04:22

I would love this for my room let me save space versus sideways bed. Maybe spray chalkboard or dry erase on one side magnets to one side and daily to do notes on the other?