We built this A-frame chicken coop using the plans from Ana White. We modified them a bit to include a front door, a solid front wall, and 8-foot untreated cedar fence boards (cut in half) for the loft floor instead of plywood. We also used hardware cloth instead of chicken wire since racoons are a problem where we live, and they have been known to reach through chicken wire to grab at hens. Instead of being able to open both sides of the top of the coop, we only put doors on one side just to make the building process a little simpler. The hardest part of building the whole coop was cutting the 60* angles on the 2"x4" trusses. Our cuts are not exactly perfect, so the nodes (meeting points of the 60* angle cuts) are a little rough, but we plan on covering this with a roof cap eventually. More photos and details are on my blog: http://littlefarmbigcity.wordpress.com/2013/06/29/red-white-and-blue-co… -kate
Built from Plan(s)
Estimated Cost
$175 with hardware cloth, paint, front door, and solid front wall
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Paint (only on the exterior of the coop and coop ramp)
Recommended Skill Level
Starter Project
Comments
rosiejane
Sun, 06/30/2013 - 19:28
Looks great! The lantern's a
Looks great! The lantern's a nice touch :)
yurra-bazain
Thu, 07/04/2013 - 02:51
Inspiring
I love this! Makes me want to build one for my neighbor's hens with your touches in mind; perhaps in the near future. :)