DIY wooden lanterns

The free plans on this website are made possible with advertising and affiliate links.  Thank you for helping us keep plans free.

 

Difficulty
Starter Projects
| Print this plan

Super easy PB knock off lanterns...on the cheap!
http://cleverlyinspired.blogspot.com/2010/10/potterybarn-lantern-wanna-…

Preparation

Common Materials
120 grit sandpaper
paint
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

Comments

mistie (not verified)

Sat, 12/29/2012 - 08:29

Hello! I am absolutely loving your site and all of your creativity. Amazing! I was thinking these could be my first project, but I don't see the wood or measurements needed. Is it supposed to be under materials needed or should I be looking somewhere else?
Thanks for your help. I am so excited:)