Instructions for the Ridge Media Console Table were easy enough to understand after one read-through.
I changed up the front-drawer face to go along with other decor in room fun, satisfying project.
NOTE -- Measure your electronics. The drawer is supposed to hide all wires and electronics for a clean look, however, the plans give a 13" drawer space. The dvd/tuner I own is approx 14.5", therefore I have to store it on the bottom shelf. I guess it's time to upgrade to blu-ray.
Built from Plan(s)
Estimated Cost
100.00
wood, kreg screws, nails
wood, kreg screws, nails
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
minwax stain redwood on the table tops, and then a turquoise chalk paint, 40/60 with water, on the body. After sadning the finishes down to reveal more grain, minwax wax finish was used to protect. I use a rag with black paint on it to apply the wax. It tends to darken the grains and pull out the awesome imperfections of the wood that I love staring at.
Recommended Skill Level
Beginner
Comments
Ana White Admin
Thu, 01/14/2016 - 12:47
Cool Drawer Face and Build!
Thanks for sharing, it looks great!