Community Brag Posts

Made this over the weekend for my wife. I got the top from my work as they were going to toss it out because it was the wrong color so i took it home, got the bench plans from this awesome site and bada bing...my wife is happy! Thanks ana! Looking forward to future projects.

After seeing how expensive custom cushions can be, I decided to build a custom outdoor sofa around the dimensions of the cushions instead of the other way around.  I took some plans for a chair and modified the dimensions.  I also gave the seat a 7 degree downward slope and gave the backrest a similar angle to in order to keep the cushions from falling over since each section is a single piece (seat & backrest).

I used a jigsaw to round out the corners of the armrest and then sanded them smooth.  I ended up painting it white (hard to see in the 2nd picture) and it came out great.  

My first project using an Ana White plan and the first time using a Kreg jig (love that little blue thing!). The plan is pretty much straight forward. I had a great (but exhausitng) time building this bed for my 2 year old son. It was pretty easy and I did everything myself. Lowe's didn't cut my boards...I did! Bought a circular saw just for this project.

My only complaint is that 2'' wood screws are not on the posted "shopping list" and are needed for the side rails construction. It is listed in the step by step instructions, but if you are shopping for this don't forget to add this to your list of needed items. I got to the side rails and had to go back out for wood screws before I could add the cleats. Also, if I had to do this project over again, I would sand the plywood panels BEFORE constructing the head and foot boards. My reason being that I used wood stain. I've learned that plywood stains best when it is sanded to a smooth finish and pre-treated with wood conditioner. Once assembled, the slats on the head/foot boards make it impossible to sand the plywood with a power sander (too narrow). I had to manually sand between each slot...talk about tiring! No other glitches though! This was a fun project and the instructions were great and easy-to-follow.

I used Minwax water-based wood stain to finish my son's bed. I had it tinted at the paint desk to charcoal gray. In the store it looked very driftwoodish. However, it came out looking more blueish on the bed. I still like it though and my son loves it. I would wipe the stain on and keep it on no more than 20 seconds before wiping the excess off. I wanted the grain to show through really well and after many, many test pieces this seemed closest to what I was looking for.

In case anyone is interested, the striped fitted sheet, flat sheet and pillowcase are from Target (Target brand for $14.99 I think). The red, gray and black comforter are from Walmart.com (Style Lounge Reinforcements Grey/Multi comforter for $58). I had painted the room white with a fat black stripe shortly after moving into the house. I couple of years later we found out that we had my son on the way to we turned that room into the nursery. I primed part of the stripe and hand painted his first and middle name to overlap the stripe so that it all looked it was painted at the same time. The gray and black area rug was also from Walmart (we bought it in store about a year and a half ago...don't remember the style's name).

Thanks for looking!

I've been wanting a storage bench for my bedroom to store bed pillows and blankets while we sleep so that the dogs don't take them over during the night on the floor. This is perfect. Just need to finish painting or staining. I did add a plywood bottom. I may add trim to the bottom as well. My first larger project without my husband's help! 

We were able to finish this table after work one afternoon and stain it the next day. (we have a 16 month old also, so you can do it! :) ) I wanted a similar style I had found at World Market that retailed for $700 we were able to complete this entire table for $100 including all hardware and stain. LOVE it so much and get SO many compliments on it. Thanks so much!

Shelby
The Dandy Lion

I made this table for me and my wife.  We love how it turned out! Approximate dimensions are 83"L x 37"W x 30"H.

I planed the table top boards down to around 1 1/4".  After assembly, I used a hand plane and a belt sander to even out any unevenness, then I used my random orbital sander and gradually increased grit to 320.  Sanded lightly between finish coats. 

Big Kids Picnic table. Made this for my daughters and they absolutely love it. Just the right size for a 9 and 6 y/o.

I changed up the legs because I had a beautiful piece of reclaimed wood I've been looking to use.  I did use these plans for the concrete top and it turned out great!  Just followed all of her advice.  It's very smooth, almost feels like soft cotton, with only tiny bubbles.  Thanks for the great plans!

Plans were easy to follow. After my younger daughter fell down the original ladder, I changed them out with steps. They have a better incline. I finished assembly in day one. Then paint on day two.

Built this with matching benches that will store underneath the table completely.  Thanks for the great ideas!!

Hubby and I built this as our first build! It's a modified version of your farmhouse table. We spliced together your farmhouse table plans and a plan for a desk with "x" legs. We modified the dimensions to fit our formal dining room. We just hosted our first ever Thanksgiving dinner at our new home, and fed my whole family on this table. Everyone loved it! Thanks for the inspiration!

Great plan from Ana White! I changed a few things with the size of the snowflake and I added a long stake to put it in the ground outside!

Submitted by Valeria Green -

My husband built this table and bench for my son and his wife. He is presently building another by request for a young couple.