Community Brag Posts

What I really liked about this plan is its versatility. Relatively easy with pocket hole joinery and inexpensive materials, I used paint to match existing furniture and solid wood tops and drawer fronts to add just a touch of elegance.

Fairly easy and fun build! We followed the plans almost entirely and spent a few hours each day throughout a week working on it, painting it was definitely the most time consuming part. It came together very easily in the bedroom and was done just in time to surprise our 3 year old for Christmas, he loves it! And I love that we can fit another twin bed underneath to turn it from a loft to bunk beds in the future.

This is our very first building project from plans. We loved them. Our first night stand twisted because our 2x2s weren't as straight as we thought they were. With a few times of repositioning them, it turned out fine. The 2nd night stand went together much quicker and easier.

We are hooked! Thank you Ana for great plans!

Super fun and easy! This was my first kreg jig build! Not sure how I got by before I got one!

Loved building this table. This was my first time building anything! I have a lot to learn but I think it turned out great!

First coffee table build. Plans were perfect! Built for $50, sold for $255

kids step stool made using scraps, personalized with name and flowers

My husband surprised me by making this sectional after I found the plans on your site. THANK YOU! We love it! It's been the centre of many cocktails and conversations over the years!
Note: cost includes the cost of the outdoor cushions which were purchased at Lowes Canada and slightly modified.

As the days have gotten shorter and the nights have grown colder I’ve found myself breaking out the winter coats and boots. The problem is, I didn’t have any place to store my coats or shoes. My house doesn’t have a coat closet. And in the past I’ve had a problem with scarves, shoes and winter gear clogging my front entryway. So I set out to come up with a solution. I needed inspiration. I needed guidance. My entry closet needed to be aesthetically pleasing because it would be near the front door and visible from the great room. So I went to Pinterest to search for a solution. I found these plans for an Industrial Style Wood Slat Closet System with Galvanized Pipes by Ana White.

We needed a place for our garbage/recycling bins that would look nice and was inaccessible to our dogs.  I decided to make two drawers for the bins and two drawers for storage.  I found a set of 10 drawer slides on Amazon for around $50.  They are heavy duty and full extension.  I measured our garbage bins and built to size.  The total height of the cabinet is 36" including the countertop.  The cabinet width is 35.5" and the depth is 20".  The butcher block countertop(25" by 48") was purchased from Home Depot for $98.  I only had to do a light sanding, router the edge, and apply a finish.  The cabinet will be located along a wall and have room for a counter height chair.  This will allow my youngest to have a snack while I work in the kitchen.  Although I didn't use a specific plan, I used ideas from several of Ana's designs.  Thank you for the inspiration Ana!        

Two weatherly sofas butted up against each other make a great sectional! The "Lego" table has a checkerboard on the bottom of one of the removeable table top sides, and the other acts as a water table for the little one to splash around in. Thanks so much for the plans! These were all fun projects!

Super easy candle ledges!

Made from the above plans. Instead of use pocket screws I just drilled through the table top and used wood filler to fill the counter sunk holes. It was an easy solution and really isn't noticeable. I used basic pine for it as I wanted a very rustic/reclaimed look and think I achieved that. We also didn't have a saw that could 4x4's so instead I just took 2 2x4s and glued/wood screwed them together. Gives the table another fun dimension. Used a few coats of stain and then poly over top. Went with 1x6s instead of 2x6 to save some weight.

Farmhouse table with walnut top and breadboard ends.  Edges of boards were put together with tonque and grove.  I use a router to do that and I used a router for the breadboard ends.  I have the ends held in with three dowls. The walnut made this an expensive project.  The wood for the top was around $600. 2 by 6 pine boards could be used instead for a lot less money.  I wanted to try something that required more advance woodworking skills such as tongue and grove and mortise and tenon.  It took awhile and I had plenty of mistakes tyring to get it right. I have built similar tables using pocket hole screws but I found that the boards tended to seperate and or crack over time. I did not use glue on this table top as I want the wood to be able to expand and contract without splitting. 

I built this sofa in one day, and painted it the next! I procrastinated all summer, and now that it's almost fall I decided to finally build it so that I could relax on the sofa in the back yard for the last month of nice weather here in Winnipeg. The plans were fantastic, the only problem I had was finding 24x24 cushions. The closest I could find were 22x22, so I adjusted the plans accordingly. It turned out well but I prefer it without the back cushions because that way there's more lounging room. Thank you so much for the plans!

I modified one of the cubby book shelves for storing my sewing machine, altered the plan to have only 1 drawer since it will be against the wall and added dowel pegs to the drawer to hold thread spools.
This was very challenging but well worth it. I am excited because I was able to make this. Thank you!