Community Brag Posts

My husband and I love this bed design.  The instructions were incredibly simple to follow and quite fun.  Finished the whole bed in two days.  Thank you for the tutorial!!!

I am a single father, and a firefighter/medic. I noticed that every time I took my son to the station with me all he wanted to do was play on the trucks. So I decided it was time he had his own.

I found the plans for the firetruck bed and though.... this would be cool, but it's a bit too simple for my tastes.

I took the original plans and made the bed two foot longer, and incorporated a pump panel on the side.

The pump panel is full of old pump dials and switches taken off of a salvaged truck Each one of them works (well... they show a reading at least) and light up when you throw one of the switches. The second switch on the pump panel controls the red lights on the top of the bed.

Inside of the bed I set up a 20 inch monitor hooked to a pc hidden in the upper storage, the PC has no keyboard or mouse, it is controlled remotely from my phone or computer via VNC, or remote desktop. It streams any and all of his favorite shows and movies from our network and allows him to interact with his mother via Skype.
We built a dash and installed a steering wheel.... (because how else would you drive the truck?) and a CB.
The CB was gutted and a county scanner was installed, so whenever he turns the CB on he can here the county dispatch
There is a pressure regulator valve on the dash (which he pretends raises and lowers the bucket) the valve has a switch underneath that turns on his flashing bubble light up top (which was also taken from an old firetruck) and starts a siren sound that I took out of an old firetruck toy that he had broken.
The ignition switch was taken off of a little tykes car that he had outgrown.

I posted this bed to reddit and the response was overwhelming! Check out some of the articles people have written about it!

http://www.huffingtonpost.com/2013/02/19/diy-firetruck-bed_n_2716538.ht…

http://now.msn.com/fire-truck-bed-photos-dad-makes-son-cool-bedroom

I followed the instructions at 517 creations to make this: http://517creations.blogspot.com/2011/04/ruler-growth-chart-pottery-bar…. It was relatively quick and easy project that I made to chart my daughter's growth on her second birthday (and our little ones' future birthdays). I printed the numbers off my computer, made an indent with ball point-pen and then traced with a paint marker. It took a little patience and concentration, but I drew the lines and numbers without barely making a smudge.  

I was looking to purchase a new coffe table when I found your tutuorial to build this Rustic X Coffee Table. I feel that I have a much nicer table than I could've purchased at a store. Or if I did find this table at a store, I'd imange it would cost around $400. So, thanks for taking the time to create and share these with us. I think it turned out nice. Also, this is the first time I've ever used a pocket jig, and I'm in love. 

My in-laws were in need of a place for their new tv. They choose the plan and I got to work.
I really wanted it to look similar to the furniture that They already had so I used oak and provincial stain.
I surprised them by adding one pull out drawer to each side for easier location of the movie collection.
I was happy with the results!

This Firetruck bed was made from the plans from Ana white !
We did some little modifications to it.
All sizes where changes to cm instead of inches (we live in the Netherlands, so no American sizes will do here, since all sizes are different.)

Al the electric is 12 volt, and everything works with the key.
Put away the key, and there will be no electricity... :)

it was a hard work (about 1,5 week) but its worth it.

The bed is made out of MDF. The structur inside is pine (so it can keep a big time of weigh)

My first build. Wanted something to put in front of my window for my cats to sit and look out on.

I thought you had a plan for these but I'm looking through and the closest I can find is the Vintage Step Stool. Either way it is because of your site that I have learned and become comfortable with building so I thought I would share these stools here. I made a little toddler chair to go with them to that you can see on my blog. Thanks for helping to make things like this possible!!

This is a matching book shelf to the 55-fancy-x-desk.

Build Instructions:

http://www.instructables.com/id/Rustic-Book-Shelf-or-TV-stand/

We needed a custom bed to fit a niche. We used the Daybed with storage drawers, but shorted the length by 1.5 inches to fit our space. Our daughter is very happy with her new bed.

This is my first wood project. Thanks Ana for the plan. My wife and I will enjoy the dresser.

All pine 2x4, 2x6, and 2x10 seating for 8 in espresso stain and semigloss top coat

I saw the Shirley table post and was inspired to build this for our entryway in our new home. Maybe not the best first project to pick in the new home, but man was it worth it! Turned out great. Used some leftover paint from an old painting project and it works really well with our new living room set. I listed it as a weekend project because if you're not super experienced or don't start this early in the morning you will probably need to take your time and finish this over two days.

Douglas Fir 4x4 truss beam table, made from the listed plans (modified for a 72" table top and concrete used for the top).  Also, added steal gusset plates with lag bolts to replicate appearance of exposed truss beams.  Used pocket screws in conjunction with lag bolts.  Benches were altered with half-lap joints for strength (very time consuming).  Concrete table top made with Quikrete countertop mix (charcoal powder pigment added), an aluminum "M" inlay, and slurry coated with a lighter gray grout to fill in bugholes/ voids.

Table was fairly easy- hard part was finding straight wood (mostly green DF is sold near me, so some beams would warp beyond suitability as they dried).  I had to purchase a few extras to get the pieces correct.  If KD is available, go with that.  I was able to find KD DF at another hardware store for the benches.

Concrete was a PITA.  I never worked with concrete before. Watched a million youtube videos, read countless blogs, etc.  So much good info out there and I probably over-researched it.  I despise concrete, now (the mixing/ pouring/ screeding/ and weight) but I LOVE the result.

The project was my secret excuse to buy tools Ive always wanted.

If I wouldve been able to work straight through, I think I couldve completed this in a month.  The table and benches were a couple of weekends worth.  The concrete took most of my time with making melamine molds, special ordering the bags, renting the mixer, waiting it to cure, polishing and filling the top, etc.  A wood top wouldve cut down on the overall time considerably.

If you do a wood top (as I did for my benches), either use some type of joiner to get the board edges perfectly squared against one another with no gaps, OR leave gaps big enough between boards to let crumbs fall through, OR (this is what I did for my benches) I used a super clear (Lexel) caulk for the seams of the boards and then went over it after it dried with the satin polycrylic to take away any gloss.  Now all those crumbs dont get wedged between the boards.  They wipe away with ease.

Finally, I used heavy duty felt (4x6") from the local HD at $2.50 a pair.  Cut them to size and used the self-adhesive WITH gel superglue to put on bottom of bench and table legs.  A must.

I had a console (or three tiered shelf) that I made with 2x10 and black pipe. At first I was happy with that but when I saw this console and another one on the blog of "Shades of Blue's", I decided to change the designe of my three tiered consol to Emmerson console. I love the console. In new console, I did not use any side pieces. I didn't want to throw away the black pipes because it cost money. So I ended up with this designe. I haven't put any stain or paint. I am not sure what paint or stain to put. So I leave it as it is.