Community Brag Posts

I have used your plan, to build several of the 2x4 Adirondack chairs, made a few modifications here and there but basically the same frame.

Plans are from the Rustic X Coffee Table. Since my miter saw only can make miter cuts up to 55 degrees it was too tough to make exact 60 degree cuts. My wife and I decided to put columns on the sides of the table instead of X's. I think the table looks really good without anything on the sides as well. Also, we added some addition table top supports with two, 2x2s, placed horizontally across table.

I was inspired by this workbench post to create a workbench, especially since I needed one! I painted it with exterior paint and added wheels. I also added extra wood around the bottom to make it sturdier.

Instead of just screwing the rails to the bed, I used bed rail hooks to connect the bed for easy disassembly. 

Made this out of free wood I got from my workplace.

This was my very first woodworking project. It took me longer than it should have due to my unfamiliarity with power tools. Overall I would say that this project is a pretty easy build. The plans were clear, and I only made a few changes/additions. I increased the overall height of the chalkboard by 4" and attached the back legs with a hinge rather than screwing straight into the back of the chalkboard.

These crates are inspired by vintage farm and orchard crates, made from discarded pallets, and personalized with a
easy image transfer method using only wax paper and inkjet printer. At
the end you will also see some fabulous diy failures so you can get a
more consistent result with this technique.  Also included is a nice homemade non-toxic furniture wax recipe to finish the crates! You can find the full detail tutorial here- http://www.apieceofrainbow.com/diy-pallet-wood-crates-easy-image-transfer/

I made this dresser and nightstand for my oldest daughter when we moved her into her "big girl" room, as we were expecting a second daughter who would take the nursery.  I ended up modifying the design a bit with the side panels to have them more closely replicate the multi-layered look of the actual Pottery Barn dresser.  I wanted to add a nightstand to have another matching piece for more storage.  I ended up taking some average dimensions from other kid's nightstands online and designed and built it in the same style and manner as the dresser.

The overall project took WAY more time than i thought it would but I'm very happy with the way it turned out. This was the first time that I used a router to cut grooves in the drawer box pieces to slide in and lock the drawer bottom in place.  Also, this was my crash course with an HVLP sprayer as well.  Hopefully, these pieces will be able to handle all of the abuse my 3 year old daughter will surely give them.  Thanks to Ana for the wonderful plans!  Also, thank you to Ed for his detailed write-up on his modifications, http://www.edhart.me/2015/05/how-to-build-a-kendal-extra-wide-dresser/.

I used dowels in the screw holes.

Free, quick, and easy!

We used these instructions for this project. This is for our king size bed. We used premium pine wood from Lowe's and Home Depot. The boards weren't 100% perfect, so on the back side we had to attached a piece of wood vertically and centered to straighten them out. For the stain we used Minwax Honey 272 and applied a coat of polyurethane (clear satin). 

My daughter wanted a dressing table and we had just dismantled a small wooden shed so I made her one by recycling the wood. I’ve only been woodworking for about 2 years and I’m really proud of it. Hope you all like it.
Steve Ross

I used the project plan for dress up storage to make a place to put my girls dance things! I have five girls and they are all in dance. We had all the dance leotards, ballet shoes, tap shoes, tights, etc... stuffed in one box! Thanks Anna for sharing this plan! Its so useful, and a great addition to their room. Not to mention sooo cute!

Made this Pallet from scratch with standard 2x4's and 1x4 pine boards. Stained the 2x4's a medium dark and used white chalk paint on the 1x4's. Project came out very nice and the wifey loved it. Happy Wife, Happy life.

From selecting wood and staining, it took about a weekend to build and an additional weekend for finishing. It's stained with Minwax  classic grey and protected with three coats of poly. Recommend only using 0000 steel wool between poly coats, as sandpaper took off the stain. Also modified ladder and safety rails. For smaller space, it works great! Build cost came in as expected. I used a Kreg Jig and flush screw plugs. Great project! Best I was able to find after an exhaustive online search. Keep up the good work!