Community Brag Posts

I modified the dimensions slightly and opted to not mount the fold down doors as I figured they would always be open anyway.  I built this mostly from solid red oak save for the bottom panel and the middle panel, which are plywood.  I crafted the top out of 5 pieces tongue and grooved with mitred corners on the front.  I also tongue and grooved the doors with glass insets.  I finished it in Minwax red cedar under poly.

We needed a large dining room table for our space and couldn't find one we liked that didn't cost a fortune.  We adjusted the plans to make the table 9 feet long.  Also, around the edge of the table we added a 1.5 inch frame.

I built these bunk beds for my almost-10 year old twins this spring! These were modified from the Side Street Bunk Bed plans to accommodate the longer Twin XL mattresses. I took inspiration from the Maine Cottage bunk bed collection for the end panels of the beds, and added furniture feet as finials on each post. It was a fun build, but pretty time intensive as I built both sets at the same time. This was my first major build.

I adjusted the measurements to make it longer and wider. I also looked the original Pottery Barn trunk and tried to copy the multi color finish. I had so much fun building this!

I stumbled on this site a while back as I was looking for ideas for an enclosure for my grill. I decided that my current table was fine, but found a TON of great ideas here on this site.

This patio table was first on my list. We enjoy having people over and I really like the built in coolers. We've started using our patio so much more already now that we have a good place to sit.

I modified the plans slightly: Extended the table so that we could fit up to 8 people, used 4x4's for the legs instead of 2x4's, and added a hole in the middle for an umbrella.

I need to build a couple benches (the chairs are a little low). That's the next project on the list!

I love this site! This is my second build. I started this project one weekend and came back to it to finish. Unfortunately, two of the boards bowed by the time I got back to it the next weekend; so, I added imperfections of mine own and give it a rustic look! 

This was an easy project that should help provide us with fresh, pesticide-free produce for many years to come. Thanks, Ana! xo

I've been wanting to build this swing for a year now, and finally it's completed.  I LOVE it!  The modern design is perfect for our front porch as our home is more of a contemporary style.  It was the first project I've done using the Kreg Jig Kit, which is AWE-SOME!    

I modified the plan a bit:  I made the swing 52" long, and used 1x4's for the back support instead of 2x4's.  I also upgraded the top and back 1x4's and 1x6's to poplar wood so the grain would be finer.  The plan was simple to build.  Thank you for your blog and providing plans!  There are other things on your site that I look forward to making.

Built this for my wife from warehouse floors from the Mare Island Naval Station. 150 plus year old planks. Doug Fir.  Hope it will become a family heirloom!

A collection of different sized perfect end tables for my mother.

I built this bench for my niece on her birthday. It as easy and fun to build. My niece and everybody at the party loved it.