Airplane shelf
![](/sites/default/files/3154832736_1376980128.jpg)
I took the plans and got a little creative with them. Really easy to build.
I took the plans and got a little creative with them. Really easy to build.
I built a pair of cornhole boards following a tutorial on This Old House. I used the Glidden Paint Team Colors line to get the a quart of blue and orange paint in the official Auburn colors. I used my Silhouette Portrait machine to create stencils for the AU logo, Auburn tiger logo and "War Eagle" text.
Love , love, love building this hutch. Started off with plans from the Shanty Hutch and out my own twist on it. Finished with valspar chalk paint and aging wax. Total build took around 2 weeks (part time).
I’ve been working on building up to this playhouse for a while. Just got the doors on and am pretty pleased with what’s my first project of any size. Built on top of a modified version of the playhouse deck with a to be added (hopefully) swing in front. Color selection by the end customer (who’s 8). Modified to add 12 inches for a 5’ doorway. Thankfully I caught that at the last minute for the kiddo. Still a menace if I forget to duck. But super roomy once inside.
Sun, 06/12/2022 - 09:04
Love the shades of blue, thank you for sharing your awesome creation!
I've been using a bunch of FREE pallets on some projects here lately and decided to make the Reclaimed Wood Headboard with the pallet wood that I had. Every piece of wood came from pallets and it turned out pretty great. We're still undecided about if/how we want to stain it....but for now it's all natural'. I made mine a couple inches shorter then the plans called for and an inche or two narrower based on the measurements of our Full Size Bed. I documented this project as best as I could at: http://www.tommyandellie.com/Site/Home/Entries/2011/7/20_Entry_1.html
Wed, 07/20/2011 - 05:37
Looks beautiful. I wouldn't stain it. Just put a clear finish on it and call it good.
Sun, 07/24/2011 - 10:08
One of my favorite things is to use pallets for lumber! I have finished pallet wood before successfully using Minwax Poly-shades. Love Golden Oak as it doesn't do much but enhance the grain...grab a few samples and try them out on some scrap boards, that's the only way you will know how it will look in the end! Best of luck!
Thu, 01/26/2012 - 19:21
we tried the link for this project and it said error. Would love to make this for our bedroom. could you please let me know the directions?
Thanks!
In reply to reclaimed wood headboard from pallets link by Guest (not verified)
Fri, 01/27/2012 - 09:00
We pretty much followed the plan with the exception of making the legs 28" tall and then removing the middle bar and then adding two additional supports 4" higher than the lower ones and put them on the opposite sides as the lower one. It formed a ladder like thing which we wanted since this was for kids starting at age 3. I hope that makes sense it doesn't really sound right to me but anyways moving one. It was really fun to make these I made three for my older sister since the walmart specials that she bought were horrible and falling apart after a short amount of time. They were easy two do probably about a day of cutting and assembling and then a day of staining and polying however if you were only doing one then it would be a day project at most. My other tip is that after cutting all the pieces I sanded them which made it nice after putting the top on and not having to worry about if the parts in between the two pieces touching was sanded enough not to give the kids splinters. And the best part was that I got a new tool which I love, the Kreg pocket hole jig. It was fun. I did have some splitting on the test wood pieces (scraps from cutting pieces for the stool) so instead of having the aprons flush I used an old cd case under the apron and attached them that way it was close to center but no worries about splitting and was super easy to do.
This was my husband's and my second furniture build, and the first with doors! We went ahead and followed the dimensions in the instructions, and even with wood that was 3.5, we still had doors that were a little short. I figure it adds character. Hinges were a little difficult for us, as we are new to woodworking DIY projects, but I'm very happy with the final project. Edge banding, magnetic clasps, and stain throughout really makes it look like a nice, finished piece. Thanks, Ana!
A side note on timing, for us this was a long weekend project that took us in to the next week. For others, I am sure it could go much quicker. That time also included finishing.
Customized this table to fit perfectly in my laundry room. It turned out exactly how I had hoped!
Sun, 10/14/2018 - 13:31
Wow, this is absolutely amazing! What a perfect and lovely spot to fold and sort laundry! Thank you so much for bragging.
My daughter has a VERY SMALL bathroom and this was the perfect build to create storage! Thanks, Ana!
Sat, 06/25/2022 - 12:33
This looks fabulous, thanks for sharing!
This is a slightly modified version of Ana's Providence bench.
http://ana-white.com/2012/04/plans/providence-bench
In Step 1, instead of having the bottom supports flush with the end, I decided to center them on the 2x4s.
This means the bottom rail needs to be shortened accordingly.
I sanded everything down with 120, and 220 grit sand paper.
I find it easier and quicker to sand larger pieces of lumber than smaller pieces.
Next everything was cut to size, and then primed. I let the primer dry for a few hours, and added the second coat of primer.
I primed all the surfaces, exposed and unexposed. Now some of you may think this was overkill. But since I live in Arizona, I didn't want the wood warping. This also protects if from all the elements.
Next day, it was all assembled, this took a few hours, we used a kreg jig to make most of the holes, I didn't have the right kreg screws, so I just used outdoor deck screws.
Finishing:
I filled all the holes with wood putty. This needed to be done several times, because putty shrinks, more so in the heat here.
Eventually, sanded it all down with 220 grit lightly, just so that there were no tell tale signs.
Next painted the bench red a few times. I needed about 2 coats to get it just right..
My contractor commented on how sturdy this bench was, coming from him, that's quite a compliment, it turned out to be A LOT sturdier than I thought it would be based on how flimsy those angled supports were...
It matches my red front door and is a great place to have my morning coffee and put my shoes on.
Took me a little while for the first one, but now going to make more and will be much quicker now that I made it through the first time!
Thu, 03/19/2020 - 06:31
Can you please let me know how you installed the hinges. The toy chest has an inlet on the back so the lid and hinges are not flush. How did you install them?
Any suggestions or sketches of installation of lid with hinges?
Thanks- Joanne K
So took the plans and added a 1x4 floor on bottom and 2x4 runners on bottom for support and to keep off ground. The used landscaping fabric to help hold sand in.
Thanks for the plans was quick and simple and had done in about 4 hrs start to finish.
I built these lawn chairs for my daughter from your plans. Thanks
As my daughter got older she refused to sleep in her crib, so I decided I wanted matching beds for her and my son. We live in a small 2 bedroom house so they have to share. So while looking up ideas for nice beds at a cheap cost I followed links until I reached ana-white.com and I was amazed. I sat on my computer for hours yelling at my husband to "COME LOOK AT THIS" (which I still do today). So I picked a plan and started on in. With some help cutting from my dad I had the first bed done in a couple days. Sadly I have not finished the second due to a random mind and trying to find a way to make my boy and girl room a little more grown up and uni-sex friendly.
Sat, 07/30/2011 - 08:15
Doesn't matter who helped - you did it! Can't wait to see the finished look when the room is all done - please keep us posted!
I adored this desk, but wanted a stainless steel top to match the vibe in the rest of the room. Thanks to another Anna white post about killer b designs (i think!) building her own dream kitchen, I realized I could get a local welder to fabricate a top, just like she got them to fabricate the top of her island. They built a sleeve that drops right on top of the wood top, and creating about a 3/4" overhang all the way around the desk; it cost about $275. Otherwise, I followed Ana's directions and painted it an off-white color that's the same as the trim in the room. Love it! Thanks Ana!
I followed the plan exactly. I did have to improvise attaching the footboard to sides.
My wife and I decided to remodel our laundry room. I built these cabinetsand doors to store soap and cleaners. They are 39Hx30Wx12D. I used the Kreg Pocket Hole Jig and the Kreg Khi-Hinge Concealed Hinge Jig. I have to say, Kreg jigs are AWESOME!!.
Mon, 05/29/2023 - 14:50
Hi,
I am a big follower of your projects. Do you have laundry cabinets plans? haven't seen one as yet.
My laundry room is 71 1/2 inches Wide. Any suggestions that you might have?
Thanking you in advance I remain,
Benito Torres
863.521.2191
Building Bunk beds and custom beds is what i do. I router the corners so that they are rounded, plane the face's of the boards,and sand to perfection. then i glue and screw it all together. you can check out the site at http://www.dreamworksbunkbeds.com
Made with Western Red Cedar 1x6 fence boards and 2x4. Finished with General Finishes Arm R Seal.
Thank you Anna.
Love this chair
Tue, 10/30/2018 - 10:59
One of my favorites too! Glad to see it built, thanks for sharing!
Comments
vic b
Mon, 08/19/2013 - 23:46
just so cute. love it.
just so cute. love it.