DIY 6 Drawer Dresser

Submitted by thediyplan on Fri, 08/02/2019 - 06:48
Difficulty
Intermediate
| Print this plan

I was looking to build a DIY 6 drawer dresser that would have a modern look and would match our king size bed that I built earlier for our bedroom. Since our bed is low I wanted the dresser to be few inches from the ground. So I placed the dresser on a base made from 2x4s. Also, instead of adding handles I decided to leave a 3/4" gap between the drawers to pull them out.

For more information on this Dresser and to download printable PDFs visit TheDIYPlan.

DIY 6 Drawer Dresser
Dimensions
Dresser dimensions

Preparation

Shopping List

Tools for this project

Drill
Kreg Jig
Miter Saw
Tape Measure
Table Saw
Nail Gun
Kreg Drawer Slider Jig

Material List

• 4'x8' - 3/4" Plywood (x2)
• 4'x8' - 1/2" Plywood (x2)
• 2x4x8' (x2)
• 2x3x8' (x2)
• 1x10x6' (x3)
18" Drawer Rails (x6 pairs)
2 1/2" Pocket Hole Screws
1 1/4" Brad Nails
1 1/4" Pocket hole screws
2" Wood Screws
Wood Glue

Note: Lumber dimensions are listed as nominal size.  See lumber sizes for actual dimensions vs nominal.

Disclosure: Some of the links on this page as well as links in “tools for this project” and “material list” sections are affiliate links. 

Cut List
Help Improve This Plan

We apologize if there was an error in this plan. Please help us out and report any errors here.

Project Type
Room

Comments