I was looking to build a DIY 6 drawer dresser that would have a modern look and would match our king size bed that I built earlier for our bedroom. Since our bed is low I wanted the dresser to be few inches from the ground. So I placed the dresser on a base made from 2x4s. Also, instead of adding handles I decided to leave a 3/4" gap between the drawers to pull them out.
For more information on this Dresser and to download printable PDFs visit TheDIYPlan.
Pin For Later!
Preparation
Tools for this project
• Drill
• Kreg Jig
• Miter Saw
• Tape Measure
• Table Saw
• Nail Gun
• Kreg Drawer Slider Jig
Material List
• 4'x8' - 3/4" Plywood (x2)
• 4'x8' - 1/2" Plywood (x2)
• 2x4x8' (x2)
• 2x3x8' (x2)
• 1x10x6' (x3)
• 18" Drawer Rails (x6 pairs)
• 2 1/2" Pocket Hole Screws
• 1 1/4" Brad Nails
• 1 1/4" Pocket hole screws
• 2" Wood Screws
• Wood Glue
Note: Lumber dimensions are listed as nominal size. See lumber sizes for actual dimensions vs nominal.
Disclosure: Some of the links on this page as well as links in “tools for this project” and “material list” sections are affiliate links.
Comments
wbengle77
Tue, 09/01/2020 - 08:39
Does anyone have a Cut List…
Does anyone have a Cut List for this project?
chach2667
Sat, 10/10/2020 - 05:29
I clicked on the PDF for the…
I clicked on the PDF for the project. He doesn't have a "cut list" but he does show a diagram of the cuts.
Acabrera77
Wed, 01/20/2021 - 16:30
I was wondering if you can…
I was wondering if you can make this same exact one with 8 drawers? i really like this one but for my duhhh.. kinda of brain i was hoping you have plans for this one? Sorry for this weird request. THank you