The easiest tutorial for building your own corn hole game. You'll just need a drill and jigsaw for power tools. Free PDF Printable plans with steo bt step diagrams from Ana-White.com.
Collections
Pin for Later!
Preparation
Shopping List
- 4 - 2x4 @ 92-5/8" or 8' long (whichever is cheaper)
- 1 - 1/2" thick 23-3/4" x 47-3/4" or 2'x4' plywood project panel, one side sanded, exterior grade recommended (I used these), but can also use hardwood or corn hole board tops (with the precut hole in the top)
- 2-1/2" exterior screws (I used these)
- 1-5/8" exterior screws (I used these)
- 4 - 3/8" bolts (I used these)
- 4 - 3/8" nuts (I used these)
- 8 - flat washers that fit over the bolts
Project Type
Room
Comments
Mike88
Mon, 08/16/2021 - 18:14
Coating
Amazing plans! I was just planning on making a pair of these and your plans have been a life saver. I was wondering about preserving the boards. Other than the paint (or on top of) would you use something like polyurethane or something similar to protect it outside? Thank you again for the amazing plans!
In reply to Coating by Mike88
Ana White
Wed, 08/18/2021 - 10:43
Thank you! Yes, I would…
Thank you! Yes, I would recommend an outdoor clear coat. We are going to add a decal logo to the top, so waiting on that before clear coating.