As a mother of a ADD child I was at my limit of lost homework, permission slips, library books for this family of 6. I was tired! So in order to better manage my multiple children's stuff from school, activities and everything scribbled on one of many calendars I came up with this idea. In the TOP Center Square I took a SMALL monitor (Flat Screen) Mounted it so that the family could see our up to date COZI Calendar that syncs with all of our calendars.
I have a Family Daily Organization Board that has a section for each family member that consists of a magnet center with LETTER, Dry Erase Middle (Magnetic As Well) and a Letter Bin system to hold all there papers, books, etc.
Please take into consideration that this was made for a family of six. Please adjust accordingly and good luck!
1- sheet 1/2" PureBond Birch Plywood
1- sheet 1/4" PureBond Birch Plywood
1- sheet 3'x4' Sheet Metal (Galvanized)
3- 2 1/4"x 8' Pine Door Molding
4- 1 1/2"x 8' Pine Molding
1- 1x4x8 Pine board
1 PKG Rustoleum Dry Erase Paint
9/16" 18 gauge nails for Nail Gun/Stapler
40"X 78" sheet 1/2" PureBond Birch Plywood
2- 2'x 3' sheet Sheet Metal (Galvanized)
Beware: SHARP EDGES
2- 75 1/2" x 2 1/4" Pine Door Molding Beveled 45 degrees
2- 40" x 2 1/4" Pine Door Molding Beveled 45 degrees
2- 71 1/2" x 1 1/2" Pine Molding
5- 10 1/4" x 1 1/2" Pine Molding
10-11 1/2" x 1 1/2" Pine Molding
2- 7 1/4" x 1x4 Pine board
Please see Lady Goats Letter Bin instructions for directions on cuts list and templates.
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
Take your 2- 2'x 3' sheet Sheet Metal (Galvanized) and attach it to your 40"X 78" sheet 1/2" PureBond Birch Plywood using the 9/16" 18 Gauge nail gun. If you do not have a finishing nail gun, pre-punch the metal before tapping your securing nails down in all corners and middle of metal. Paint exposed board and outer metal with desired color choice for base.
Beware: SHARP EDGES
Take the two leg pieces "2- 7 1/4" x 1x4 Pine board" glue and staple to the bottom of the wall unit. Use the jig saw the cut out the notch between the two legs. Then Attach the outward "FRAME" 2- 75 1/2" x 2 1/4" Pine Door Molding Beveled 45 degrees and 2- 40" x 2 1/4" Pine Door Molding Beveled 45 degrees.
Glue and nail the two main vertical dividing 71 1/2" x 1 1/2" Pine Molding according to the measurements. Attach the horizontal center pieces (10 1/4" x 1 1/2") Pine Molding to desired height of squares. Mirror remaining dividers 11 1/2" x 1 1/2" Pine Molding. Remember the dividers are covering the metal edges of the steel. So keep it in mind when working on your project.
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.