FYI, if you're looking for the plans for a vertical Murphy bed with the hardware, you need to go here to buy the hardware: http://www.rockler.com/product.cfm?page=17212 and the vertical plan is *included* with the hardware. The link in this post is to a separately available side-mount bed using the same hardware, not the vertical one.

Ana-- this bed is GREAT! I am going to have to make it.. our guest room is running out of space. Great idea. Do you think we could use this plan for a full size bed? That is what we have. Thank you for your blog... my family loves it!

Dear Ana, at K O W
Happy Spring
Happy Monday
Happy Building!

I enjoy your site so much.
My husband and I will have to build the Murphy bed for our library (the only place we can put an extra guest bed just now) We have talked of this for a long time...30+ years as we slept in one on our honeymoon. I joked him really good (which is so rare).. that at the headboard I could see down to the room below us!! We have laughed about that many a time. Thanks for the
fun idea.
love,
Murphy Memories in Nebraska

So I'm beginning to think you have a bug planted in our house. I just said yesterday, when we finish the basement bedroom, we should put in a murphy bed, and then I wished you had plans to one!

Love your blog...love you!
thanks

Very neat. Do you think you could do a bookcase plan for tall, real wood bookcases and recommended hardware? I desperately need bookcases that look like builtins for book storage and can't pay a fortune.

What good timing you have. We can really use a Murphy bed for the small room we fixed up for my grandson, who rarely visits. I'm changing it over to my sewing/craft room to get all my "stuff" out of the living room, but will still need a bed in case he does come to stay. This one would be great and still allow me all the room I need for crafting!

Well, I'm the third person so far who just mentioned *last week* that a Murphy bed would be great in my in-the-works craft room, if only Ana had plans for one! :D

I just got back from Lowes with the hardware and a brand new air compressor. Now one more trip with no children in the van and I'll have the wood. OH, THIS IS EXCITING!! I will be posting my progress on my blog - I hope to make you proud!

If we wanted the bed to be sideways would all we need to do is switch the hingeing spots to the long sides instead of the short sides? I kinda like how the link showed the bed sideways and then it could be used for a nice shelf when not in use.

On the cut list the front side trim shows 75" but then the actual measurement should be 77" per the diagram - is that an accurate correction to you? I guess we'll make a decorative little corner piece at the bottom... no one will eeeever know!

I'm with Crissybug - would love a Murphy bed for a queen sized bed, but it seems the DIY options that are out there suggest that twin or full are the max that the hardware will support. Your design of resting the floor on the bed seem like they may be more forgiving for a larger bed... what do you think?

Hi Anji, there was defintely a typo in the cut list - side trim should be 77". I made this change, thanks so much for taking the time to comment on this.

Hardware is definitely an issue when considering a queen. The support problems will not be when the bed is open or closed, but when you open or close it. Might be difficult to open or close a queen bed without some help. Could be dangerous too. Hmmmm . . . a wind up winch . . . this needs to be hacked!

Ana, perhaps instead of a winch, you could incorporate a counter-balance weight in the sides, if they were a little deeper.

Hi Ana! I was revisiting this post because I've been trying to figure out how/where to put a nursery without losing my guestroom. And then I remembered the murphy bed! We already have a queen sized bed in there that I planned on using for this project. I saw where you mentioned it being a safety hazard due to weight, I wanted to let you know that I plan on modifying your plans so the bed lays out horizontally, which will make it much more manageable for its size, but also I can put molding on the outside so it has that feaux fireplace/mantel effect while not in use. Thank you so much again for all you do!
Loni

If anyone has actually attempted to do the queen size bed, please message me at [email protected] as I would love to do this with our existing queen mattress so I don't have to lose my guest bedroom when we turn it into a nursery! Probably would work best if turned horizontally?

[...] Knock off Wood : This plan was actually posted after I constructed my bed or I would have gone with it.  You have to be able to lift the weight of your mattress, but the same is true of the Lori bed and I’ve had no issues.  The bed would also be a bit low to the ground, but a few mods to the plans would fix that. [...]

Awesome plan Ana. We own a pop up trundle. I wonder if you could fit that in this plan--it would take care of the expensive hardware. I just cannot put my parents on the floor. They are aging.

I made this out of the knottiest pine Orange had for an extra-long twin mattress we had, so just added 5 inches to the height.  It makes for a very tall "cabinet" but I'm planning to build a shelf system in next to it and match the doors so that it'll look like a half-wall of tall built-in storage when the bed is closed.

I used a 30" piano hinge for the bottom, were I to do it again I'd buy a longer one and cut it to size.  The trim kept pricing out to be pretty expensive, so I ended up using 1/4" luaun ply cut into strips.  I went over to my dad's & we cut the strips on his tablesaw, but orange would've done it for me too, albeit with a little more edge sanding.  I finished it with watered down white semi-gloss latex paint (for a siort of white-wash) which helped camouflage the ply sides and filled pocket holes but lets the knots and some of the character show through.  It ended up looking slightly old fashioned without being distressed, although that could work too with a little 150 & elbow grease.

I used 1x2's I already had, but if you're buying them new I'd check if they match the thickness of 1x12 before you leave the store, or use 1x2 to trim out the front of a scrap of plywood.  The jig saw hasn't been unearthed from our chaos yet so I made all the cuts (save trim) with a chop saw.  For the sides I used another 1x8 and cut an angle at the top to keep there from being a sharp corner and help it look a little nicer.  Ended up having to trim a strip off the front of the "door" because I didn't account for the thickness of the cabinet bottom when it's folded up, so I'll add to the chorus of check your measurements before you build =0)

PS  The watered down paint thing I read on a website awhile back but can't remember where and can't find it to give proper credit.  I saw them do it on DIY yesterday but they dipped the brush first in paint, then water, then dabbed.  I stirred paint into water until it looked good and rolled/brushed it on.

this looks really cool, but what does this look like when closed? Do you have any pics of the stow away version? I would love to see them.

I am not an extreamly experienced woodworker so I can't really modify plans I just go by exactly how it says. So with that being said how would I convert this to being horizontal rather than vertical? Any tips can be e-mail to me at [email protected] Thank you!

I would also like to know how the plans would change if the bed was build horizontally. If anyone out there has tried this, could you please comment for everyone to see? Thanks.

I am wanting to make this in a queen. If anyone has done it and has the measurement adjustments, I would LOVE to have them. Can you please post or email me? If you have pictures, even better!!

Funny that I ran into this today. My husband and I have been discussing what to do with our guest bed. It takes up so much of the room, but we only have guests here and there. I also use want to use the room for sewing and crafts. Has anyone figured out how to adjust the plans for a queen-sized bed? If so, please email to [email protected]. Thanks!

I too am interested in making this horizontal. Has anyone done it?

I just happened upon your blog! I'm so happy I did! I was trying to figure out what to do for my son's room. He has the smallest room in the house and wants a full or queen size bed. He also wants his floor space for hanging out with his friends. A full or queen won't fit in his room AND allow for "floor space." This is PERFECT! I would want it to be horizontal. He currently has a daybed in his room. What would I need to change to make it horizontal and to fit that size of mattress? Thank you so much! Aubrie [email protected]

Great Plans for a Murphy Bed. I will be able to do this myself.

One question. Most Murphy beds are off the floor.

How would I set the bed so it was off the floor, and would an entertainment centre around the box work?

Has anyone attempted the horizontal murphy bed? I have a full size mattress I want to use. And what about setting it up off the floor?

I would so love this for the double bed in my studio/guestroom/playroom but it has low ceilings so I think horizontal would work best. Plus, I'm in central Canada, the room is in a basement and it's an OLD house so drafts are always a problem in the winter so I would like to have it raised off of the floor a bit (as it would be with legs). I have a pretty good idea of how to make it work, but I seem to do best making stuff up as I go (and I lack the terminology know-how) so I can't really describe it well -though it's already figured out in my head. I will post photos once I start working on it but I won't likely be building it until next spring. In the meantime I'll keep checking back to see what ideas and suggestions others have to offer.

Any ideas how to make it raised a foot off of the floor with legs. Is the plywood strong enough to support it if it is raised? I was concerned with bowing.

Thanks
Meg

i am currently building 3 that are off the floor just added inches to the side and front piece I will let you know how it comes out in a few days

we used twin sized added height to the side pieces raised the bottom up and added a small board under it for support and added legs it worked great we made all three no problems :) thank you for the plans best thing I have in the house now we have a play room and a bedroom

This looks perfect for my studio apartment! Thanks so much.
One question - maybe I am just not reading the plans right, but how do you open the bed? It looks like the mattress box/door is flush with the side and front trim when it is closed, so I am not sure what I would hold on to in order to open the door. Do I need to attach a handle?
Also, can anyone explain "compression hinges", mentioned as optional in the parts list. I googled the term but didn't find any useful information.
Thanks.

Ana, please consider creating plans for a queen sized version with legs or a raised platform. I found some directions of the DIY network site, but without your detailed plans and drawings, their tutorial was useless.

http://www.diynetwork.com/how-to/how-to-build-a-murphy-bed/index.html

do you have a picture of the bed up ?? can u see it to me. i would true like to see it
thanks
sylvia

Being a novice at wood working I read through the instructions and found the Kreg Jig listed as a necessary tool. I didn't however see any reference in the instructions on where/how to use the said tool.

Do you have any words of wisdom on which steps it is necessary to use the Kreg Jig?

This will be a perfect setup for my son's bed as he's only with me every other weekend and when not in used it will take up very little space.

Please advise on the Kreg Jig and useage.

Thank you,

Jeff

My advice is to research the kreg jig first. It's a pretty slick little tool, and the manufacturer has a lot of videos and other material out showing you how to use it. Once you see it used, you'll understand where you should use it in the construction.

Has anyone been successful in doing a horizontal of this in a full size bed? I would love to get the cut list for that, I think it would be relatively easy to alter the plans to accomate it, but if anyone has done it already and has a cut list that would be great!!

Has anyone been successful in doing a horizontal of this in a full size bed? I would love to get the cut list for that, I think it would be relatively easy to alter the plans to accomate it, but if anyone has done it already and has a cut list that would be great!!

Has anyone been successful in doing a horizontal of this in a full size bed? I would love to get the cut list for that, I think it would be relatively easy to alter the plans to accomate it, but if anyone has done it already and has a cut list that would be great!!

Does this close and open like a Murphy bed?

Has anyone made a horizontal version of this? If so, could you please send the modifications to [email protected]? I LOVE, LOVE, LOVE this plan!

This plan looks GREAT however I too am interested in a horizontal version since our ceiling is very low. I don't see where there is any replies to these requests. Not sure how your website works but I sure am interested in a full/double horizontal tilt plan if there is one that exists. Thank you in advance!!!

Ana ... greetings from Pakistan. My wife since she visited our daughter in Canada has been after me to build a Murphy Bed for our study ... I looked all over the internet and everyone is selling their kits, but I cannot import a kit to Karachi -- to expensive. I can build it as workmanship is affordable and easlity available. You have a big heart, you put the entire design on teh site. I would love to get some more info. e.g. the design I want to use has piston type hinges ... what are they called? You have my email, appreciate if you can help me in any way. Super site, a breath of fresh air. Must visit Alaska in one of our global travels :) Take care

Very impressive and very detailed on building a murphy bed. I think this would work great in an RV! I added a link to this to my blog for RV'ers. Thanks again.

Post goes live tomorrow. Link to the article: http://www.doityourselfrv.com/rv-murphy-bed-diy/

I was wondering if anyone has built this only full size? I also would like to see finised pics of it folded up. email me [email protected]