No room for a desk? This beautiful console table flips open to hide a laptop or a keyboard! You'll love it's narrow profile, hidden storage in the legs, and simple to build design. Free plans from Ana-White.com
6 Frameless Full Overlay Euro Style Hinges like these
1 – 1×12 @ 8′ Length (cut top and shelf from this board)
1 - 1x12 @ 10' length (cut all other cuts, largest first, from this board)
1 – 1×6 @ 8′ Length
1-1/4" brad nails or 2" self tapping star bit screws or 1-1/4" pocket hole screws (or a combination of all of the above
2 - 1x12 @ 29-1/4" - outer legs
1 - 1x12 @ 46-1/2" - shelf
2 - 1x12 @ 24-1/2" - inner legs
1 - 1x12 @ 48" - top
6 - 1x12 @ 4" - dividers
1 - 1x6 @ 48" - keyboard fold down
2 - 1x6 @ 23-3/4" - storage leg doors
Attach legs to the desk tray using your choice of fastener - 1-1/4" brad nails and wood glue, 2" self tapping wood screws, or 3/4" pocket holes with 1-1/4" pocket hole screws. You can use any combination of these fasteners to build throughout the plans, considering that the brad nails are cheapest, easiest and easiest to hide, but pocket hole screws will create a stronger joint.
Recommend for this step: Pocket Holes
TIP: The 1x12 @ 4" pieces can be used as a temporary spacer to set your shelf height.
I recommend installing the hinges at this point, since it will be hard to get a drill inside the project as we progress further. Simply screw to the project as shown, with the flat front flush to the front edges of the project. You can use a scrap piece of wood to help you place the hinges, making sure they are flush to the front.
Exact location is not essential, just close the locations in the diagram is good.
If you find you need additional support, fully enclosing the back with 1x6s (same as door faces but attached with 1-1/4" brad nails and glue) will increase the stability and strength of the project (but add costs).
The keyboard fold down can be further strengthened by a hidden chain or hinge supports on the insides of the dividers.
We apologize if there was an error in this plan. Please help us out and report any errors here.