1. Home
  2. Community Brag Posts

Altered Apothecary Media Console

Submitted by vlilly on Sat, 04/12/2014 - 08:34

I had the wood to make this for about 2 weeks. Started on Tuesday and finished Thursday evening! I wanted the look to be different from the Apothecary look so I made the doors a little different!

Built from Plan(s)
Apothecary Console
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Stained all wood with Rustoleum "Carrington" stain, then painted over the bottom part with Rustoleum "Heirloom White" Spray paint. Distressed through the white so the dark stain could peek through.
Recommended Skill Level
Beginner

Comments

jeanniemn

Mon, 04/14/2014 - 17:16

I love this! I just finished putting the frame together but wasn't loving the original door look. Can you tell me how you did the beadboard doors? And what hinges? Thanks!

vlilly

Sat, 04/19/2014 - 08:02

Sure! I just bought a 4'x8' sheet of beadboard from Lowes. I have about half left over. They sometimes have half sheets but didn't when I went. I had them to rough cut it into 20" strips to fit in my car. It came white but I painted over it with Rustoleum Heirloom White spray paint. I bought 2 12ft boards for the frames, I think they were 1/2"x2".. only around $8 per piece and they are stocked vertically at lowes near the beadboard (at the store near me at least!) I cut the beadboard at home and then cut the frame board to fit. I used glue and a brad nailer with 5/8" nails to attach them to the beadboard. My doors had to overlap the plywood since I had the extra shelf that was flush with the rest of the cabinet.. I couldn't inset my doors like she did at Shanty-2-Chic. I bought the same hinges she used, the brand is Liberty and I found them at Home Depot. $5 something for a 2 pack. They are awesome! The doors aren't heavy duty but we didn't need them to be. You could always add a layer of MDF or Lauan if you wanted them to be more sturdy!

I hope this helps.. I'll be glad to answer more questions!

jeanniemn

Thu, 05/01/2014 - 18:28

Thanks!! We are almost done but are stumped by the hinges (I bought the Liberty ones too). Any tips on those? I think we are just over-thinking it, it can't be that hard!!

jeanniemn

Thu, 05/01/2014 - 18:42

Thanks!! We are almost done but are stumped by the hinges (I bought the Liberty ones too). Any tips on those? I think we are just over-thinking it, it can't be that hard!!

pde00311

Fri, 05/02/2014 - 06:53

...has completely stumped me before, and buying the wrong type has halted one of my first projects. Make sure you pick the right hinge for how you want your doors to align. From my experience, HD sells mostly "overlay" and "3/8 offset" hinges, with a small selection of "inset" hinges. These links are to a different hinge manufacturers, but the little pictures/explanations have helped me figure out what type of hinge I need to buy:

http://www.rockler.com/how-to/understanding-hinges

http://www.menards.com/main/store/20090519001/items/media/Millwork/Belw…

(and vlilly, I love the distressed finish on the console above).