Loved this Coffee Table and wanted to suprise the wife for christmas, so being my first project I got started! had no idea what I was doing but they were great instructions, and the KREG JIG is AMAZING. altered the plans a bit to make it a rectangular coffee table (added 12 inches) instead of square to fit our living room better. Now to tackle the next project!
Built from Plan(s)
Estimated Cost
$200
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Used 2 different stains to get a brown/gray finish. just one coat of each!
Minwax Weathered Oak & Minwax Special Oak.
Minwax Weathered Oak & Minwax Special Oak.
Recommended Skill Level
Beginner
Comments
MichelleC
Wed, 03/19/2014 - 07:39
I absolutely LOVE the finish
I absolutely LOVE the finish on this, thank for sharing!!! For the estimated cost you put $100, is that without including the cost of the turned legs? Did you get the legs through Osborne? I think I NEED to make this coffee table and use that finish!
In reply to I absolutely LOVE the finish by MichelleC
jhavinga
Wed, 03/19/2014 - 09:02
Thanks Michelle!
Now that you brought it to my attention you are absolutely right, I completely forgot about the cost of the legs. including the cost of those, it does come to $200 dollars, ill change that. I also did get the legs from Osbourne. As for the finish yes do it! I am really happy with how it turned out :) thanks again and let me know when your coffee table is done so i can check it out!
Cheers,
Justin
2nervous2build
Wed, 03/19/2014 - 09:55
if you dont mind me asking,
if you dont mind me asking, in what order did you apply the stains?
In reply to if you dont mind me asking, by 2nervous2build
jhavinga
Wed, 03/19/2014 - 11:47
Hey 2nervous2build
not at all! here is a link as to what I followed.
http://ana-white.com/2013/05/vintage-graybrown-stain-pine
Ana shows exactly what to do :) mine didnt turn out as dark as her project, but am still lovin the table none the less. :)
Cheers,
Justin
2nervous2build
Wed, 03/19/2014 - 09:55
if you dont mind me asking,
if you dont mind me asking, in what order did you apply the stains?
JenWoodhouse.com
Sat, 04/26/2014 - 17:54
Amazing first build and the finish is TO DIE FOR!
Wow, congrats on your first build! It turned out amazing! And that finish? OMGosh, so incredibly beautiful! I love it! Thanks for sharing!
In reply to Amazing first build and the finish is TO DIE FOR! by JenWoodhouse.com
jhavinga
Tue, 05/20/2014 - 13:32
Hey!
Thank you Jen for checking out the coffee table! thanks for the compliment as well!
In reply to Amazing first build and the finish is TO DIE FOR! by JenWoodhouse.com
jhavinga
Tue, 05/20/2014 - 13:32
Hey!
Thank you Jen for checking out the coffee table! thanks for the compliment as well!
RE
Sun, 04/27/2014 - 17:29
AWESOME 1st Build
This is great!
In reply to AWESOME 1st Build by RE
jhavinga
Fri, 01/02/2015 - 09:48
Thank you! Cheers, Justin
Thank you!
Cheers,
Justin
Mandybeck
Wed, 08/27/2014 - 21:35
Stain
This is absolutely beautiful!!!! Quick question... You said you used weathered oak and special oak for the stain. Did you mean special walnut? I can't seem to find special oak! Thanks!!!
In reply to Stain by Mandybeck
jhavinga
Fri, 01/02/2015 - 09:47
Hey Mandybeck!
Sorry for such a late response! incase you still needed to know, I made a typo and I did mean special walnut.
Thanks!
Cheers,
Justin
usmcjeff7489
Fri, 07/17/2015 - 12:59
stain
Being as yours is much lighter (and i like it more than the darker). Did you use the wood conditioner and how long did you leave the stain on for? it almost looks like once it was on you were wiping it off. Love it well done :)
Also, do any of you guys use the paste wax when finished? I was thinking about following the stain with some poly to seal it. any suggestions?
AndyB
Wed, 08/19/2015 - 09:47
An excellent finished project
An excellent finished project. Did you use 2x6 for the top as your wood looks a tad thinner?
AndyB
Wed, 08/19/2015 - 09:47
An excellent finished project
An excellent finished project. Did you use 2x6 for the top as your wood looks a tad thinner?
joallen001
Wed, 08/19/2015 - 13:58
Table Legs
Can you tell which legs and size you used from osborne?
Project looks amazing!