![](/sites/default/files/IMG_8227_0.jpg)
Hey guys,
Here's my version of the Henry Desk following Ana's plans. There are a few minor differences that were requested by my client:
- A thicker top. I used 8/4 dressed pine (basically 2x6 knotty pine) and I laminated them together.
-Smaller desk - Top 60 inches long.
-A large drawer.
-Through tenons on the right leg that I made by using a drill press, chisels and lots of elbow grease.
I used mainly glue and dowels to assemble the pieces together, but also some pocket holes here and there.
Very helpful plan Ana. Thank you!
Erika
Rustic Charm Woodshop
![](/sites/default/files/IMG_8229.jpg)
![](/sites/default/files/IMG_8230.jpg)
![](/sites/default/files/IMG_8226.jpg)
Built from Plan(s)
Estimated Cost
$200 CAD
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Stain: Minwax water-based stain - 1 part Colonial Pine to 1 part Coffee.
Clear Coat: Varathane Diamond Satin finish
Clear Coat: Varathane Diamond Satin finish
Recommended Skill Level
Intermediate