simple outdoor chair

Submitted by Anonymous (not verified) on Sun, 01/15/2017 - 11:00

This was my first chair. I made the arms and base with 2x4's. I added a 2x4 apron in the front and back and 1x4 apron to the sides.  My next chair I will try to use the Kreg for the arms, the base will be hidden with aprons, so it doesn't matter. The slates are 1x4 as the instructions provided recommended.  I got the cushion from Lowes for $50

Built from Plan(s)
Estimated Cost
$50 - for pressure treated wood, exterior screws, stain and sealer.
Estimated Time Investment
Afternoon Project (3-6 Hours)
Type of Wood
pressure treated pine
Finish Used
Ipswich Pine- used foam brush
spar urethane - clear satin
Recommended Skill Level