![](/sites/default/files/3154810403_1337651977.jpg)
All the wood is from pallets, which you can find for free at local big box stores.
I added the shelf with the same support system used for the table top.
Made with as little cost as possible so materials are not too much.
Material:
A few pallets
Wood screws
Tools:
Table Saw
Miter Saw
Drill
Sander
Measuring Tape
Square
Pencil and Paper
Stain
Brush
Shop Cloth
This is my first Project :)
![](/sites/default/files/3154810399_1337651977.jpg)
![](/sites/default/files/3154810401_1337651977.jpg)
![](/sites/default/files/3154810398_1337651977.jpg)
![](/sites/default/files/3154810397_1337651977.jpg)
Built from Plan(s)
Estimated Cost
$7
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
1 coat of Red Mahogany 225, applied with a brush and rubbed with a shop cloth after 15 minutes.
Recommended Skill Level
Beginner
Comments
anderjes
Tue, 02/12/2013 - 07:55
Plans
Do you have blue prints or suggested measurements for this table?