I couldn't find a wrapping paper holder, so I thought I would take a shot at it myself. So, using Ana's advice on the Kreg jig, and some leftovers from her headboard project, I had 4 - 1x4's (42" each) I "Kreged" (and glued) together. Making a giant frame. Then I used a 1" paddle drill bit to put holes 3 1/2" apart all they way down the right side (about 1/2 way through the board). Next, I used a 1x2 and drilled holes all the way down and all the way through (matching the height of the ones on the other side). Then I used a scroll saw to cut out the extra little piece on the 1x2 and make the slots for the pole to enter. And sanded and attached to the left side. I added a 1x2 at the top and bottom, all the way across the inside back to mount. I had some leftover pvc I cut to fit and then decided to buy aluminum conduit pipe from the electrical dept. (It's only 2$ for a 10' piece) then I cut it with a hacksaw and smoothed the sharp edges with a file. Perfect. Stronger than the pvc and nicer looking.
