1. Home

Community Brag Posts

Kitchen Buffet

Submitted by bbcarey on Mon, 11/28/2011 - 07:20

We wanted a buffet for our kitchen- but couldn't find just the right plan. So I modified the "Dresser with open bottom shelf" slightly to remove one shelf and enclose the bottom with Doors. We matched the colors from our dining room set (black bases with stained seats and table top). The glass was purchased from a local company and is called 'cord glass' to match some other custom cabinets in our home. I do have the sketchup plans- been trying to clean them up so I can get a plan posted... but can email them in their current state if anyone wants them.

Built from Plan(s)
Dresser with Open Bottom Shelf - Open Leg Version
Estimated Cost
$400 (but can be done for less)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
High quality latex with Floetrol additive for smooth finish. If I were to redo it I'd spray it on as it wasn't as smooth as I'd wished. I matched the top stain with our kitchen dining room set.
Recommended Skill Level
Intermediate

Comments

GotWood

Mon, 11/28/2011 - 10:42

Wow, BBCAREY! Great job! I love the way this looks and it shows that you put a lot of hard work into it. I like your choice in pulls... very nice, but doesn't pull any focus away from the buffet.

bbcarey

Mon, 11/28/2011 - 11:30

Thanks- I didn't say but this actually was my first BIG project from Ana-white. It did take me longer than I anticipated (two long weekends) the painting was probably the most time consuming as I was trying to get it 'spray on' like- but didn't quite achieve that look.

Re. the pulls; I think there was a total of 5 trips to Menards and HD with different options being considered- we finally went with these as due to the large drawer size all others seemed to be under-per-portioned. So thank you - glad to see it shows well.

Appreciate your comments!!

Tuyetti (not verified)

Wed, 11/30/2011 - 11:34

This is beautiful! You did an amazing job. This is exactly what I was looking for to finish my dining room. May I please see your plans? Thank you so much.

[email protected]

dhendy13

Mon, 11/28/2011 - 16:36

This piece if a beauty. Your hard work does show very well.

I would like it, if you don't mind, if you could send me the plans. That would be awesome. I will email you if I need to to get something explained.

Just moved into a new home and this piece would go great in the dining room.

Thanks,
dana
[email protected]

viola

Tue, 11/29/2011 - 10:13

Mr Carey, I love your buffet. I to would love to have your version of this plan doors and all. Thank you for sharing...Vi

StacieM

Tue, 11/29/2011 - 20:53

This is exactly the type of thing I've been wanting to make for our dining room. Great Job!

Crystal12345 (not verified)

Thu, 12/01/2011 - 19:54

Looks beautiful! Can I please have the plans as well? Been looking for something just like this to build. Great job! [email protected]. Thanks!

mexiian1

Sun, 12/18/2011 - 13:06

bbcarey, I love the way that this buffet looks. Is the top one solid piece of wood? I can't tell from the picture.

bbcarey

Tue, 01/10/2012 - 14:48

The top is actually a 3/4" oak veneered plywood with 1x3 (sides) and 1x4 (ends) framing. I used a friend's biscuit joiner and glued the sides on with biscuits. I thought about using pocket holes but wasn't sure how to make the boards stay straight... and had used a biscuit joiner before - so opted for that. Let me know - I can send the google sketchup plans if you want them.

mexiian1

Sun, 12/18/2011 - 13:17

bbcarey, I love the way that this buffet looks. Is the top one solid piece of wood? I can't tell from the picture. Also, I would really like to see your plans for this too, if you wouldn't mind e-mailing me. Thanks!

Patrick (not verified)

Sat, 01/14/2012 - 16:14

My wife and I think that this buffet looks great. You have done a great job. We were thinking about making one also. Could you please send the plans to [email protected]. Thanks ahead of time.

amp024 (not verified)

Mon, 02/20/2012 - 12:41

The buffet is almost a replica of what i am looking for in our dining room except it will cost less than 1/2 the price to make it! I LOVE the buffet. Could you send me the plans please? [email protected]

amp024 (not verified)

Mon, 02/20/2012 - 12:41

The buffet is almost a replica of what i am looking for in our dining room except it will cost less than 1/2 the price to make it! I LOVE the buffet. Could you send me the plans please? [email protected]

nkpearson

Sat, 05/26/2012 - 22:11

The Buffet looks awesome! You have done an amazing job. I really like the glass doors.

Neal

Claudia Ingles (not verified)

Mon, 08/06/2012 - 04:07

Mr Carey, this buffet looks stunning!!!And I've been looking for one(ready to buy) for quite some time and nothing!!! Did you use spray paint to achieve the SO SMOOTH look? It really looks amazing!!!
Can I also receive your plans by email?Thank you!!
[email protected]

KATHY W (not verified)

Sun, 01/13/2013 - 20:02

This looks great!!! you did a wonderful job on it!!

tcaffrey

Tue, 02/26/2013 - 15:29

I would love the plans if you have them!!! Excatly what I have been looking for!! Thanks it looks great

bbcarey

Mon, 03/04/2013 - 19:25

I saw on another post that the sketchup model could be shared to the warehouse- which of course I knew but totally forgot. So- I've uploaded the model for this buffet to the warehouse and it should be able to be accessed from this link:
http://sketchup.google.com/3dwarehouse/details?mid=8acc2d1db12502a9cc04…

If I had the patience to work up an actual plan I would - but hopefully the sketchup model will help - there should be dimensions and I have the cut list in the model as well. Still let me know if you have questions and I would LOVE to see anyone else's finished project!

bbcarey

Wed, 12/18/2013 - 08:02

Glad it helped- I need to learn how to post a plan- but for now sharing the sketchup plan I am hoping helps (I have some other plans out there as well). I do all my projects ahead of time in Sketchup to plan for materials etc..

mommap7200

Tue, 10/06/2015 - 18:50

Any chance you still have these plans? I can't see them on sketchup.

mommap7200

Sun, 10/04/2015 - 19:11

Do you happen to still have the plans for this buffet? My email address is [email protected] if youre able to send them. I would love them. This buffet is really nice and the sketchup plans are not working for me.

My First Fence!

Submitted by shortyjuan on Tue, 10/29/2013 - 07:52

This project took me about 2 weeks. Granted, it would have been quicker, but I could only work on it a few hours every couple days. I've never built a fence before, I think anyone could do it. Just take your time and that includes time to plan. I designed houses for a year about 10 years ago, so I actually drafted some plans to help me determine how much lumber I would need. This fence will welcome our new family member soon, my wife's 4 year old german shepherd. Also, this is a treated pine fence, instead of cedar. Thanks for the tips Anna.

Built from Plan(s)
Cedar Fence
Estimated Cost
$1500
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
I will stain this fence next year after the wood dries out.
Recommended Skill Level
Beginner

Comments

spiceylg

Thu, 10/31/2013 - 01:37

Great job. Definitely more character than the neighbor's! Love the copper post caps as well.

Kitchen Corner

Submitted by shanepat77 on Fri, 01/15/2016 - 18:10

We needed something to fill the space in a corner in our kitchen. I modified this plan slightly from the original in order to fit in the space. We then topped it off with Marble top to match the counters in the rest of the kitchen.

Built from Plan(s)
Rustic X Console Table
Estimated Cost
$100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Antiqued Milk Pain with Marble top.
Recommended Skill Level
Beginner

Large Rustic X Bench

Submitted by RHgaijin2 on Tue, 05/28/2019 - 18:41

I made this bench using reclaimed 2x4's.  I made a video of the project. 

 https://youtu.be/PdbMJPvWU8M

Blog Link
https://youtu.be/PdbMJPvWU8M
Built from Plan(s)
54" Bench with Cross Bracing - Made with 1x boards
Estimated Cost
Wood was free from reclaimed pallets
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Base was painted with 2 coats of primer
Seat was torched and then covered in a waterproof spray
Recommended Skill Level
Intermediate

Comments

Adirondack Chairs

Submitted by Anonymous (not verified) on Sun, 03/19/2023 - 18:40

My husband built this Adirondack chairs. They are so comfortable.

Built from Plan(s)
Modern Easy Build Adirondack Chair

Comments

Ten dollar ledges for School Pictures

I needed a place to hang the children's school pictures. I wanted to showcase them and didn't have any ideas what wall would work. Once I finished my selves for the living room I knew it was the perfect place.

Estimated Cost
$10
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
White with a gloss overcoat. Matches my edging perfectly as my walls are a soft yellow.
Recommended Skill Level
Starter Project

Rustic x table

Submitted by Anonymous (not verified) on Mon, 01/18/2016 - 16:20

Fun project. 

Built from Plan(s)
Rustic X End Table
Estimated Cost
20
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Minwax poly coats stain and polyurethane in one classic oak

Rust oleum paint/primer spray paint /satin lagoon
Recommended Skill Level
Beginner

Ana White Fancy Farm Table

Submitted by davemd1820 on Fri, 06/07/2019 - 14:05

This was a fun project which took me way too long, because we moved to a new house in the middle of it.

Estimated Cost
$150
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Wood Finish Early American, Minwax Polycrylic Satin
Recommended Skill Level
Intermediate

Patio furniture

Submitted by Anonymous (not verified) on Fri, 03/24/2023 - 22:55

Custom cedar patio furniture

Built from Plan(s)
DIY Double Chair Bench with Table - By DIY Pete
Modern Planter Box

Comments

My farmhouse table!!! 1st project

Submitted by wesleylp on Sat, 12/10/2011 - 10:01

My husband and I created this using farmhouse table plans and we're very excited. It took us longer to get done than most because we all ended up sick. :o) Total cost was under $100 and it is awesome!! Thank you so much for the plans!!

Built from Plan(s)
Farmhouse Table - No Pocket Holes Plan
Estimated Cost
under $100.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
stain and poly finish.
Recommended Skill Level
Intermediate

Comments

wesleylp

Sun, 12/11/2011 - 09:29

We are currently making a bench and a version of the stackable chairs for our 8 foot table. WE are so excited. I have work to do but only want to help build now. :o)

Laundry Pedestal

Thank you for the fantastic tutorial to build this laundry pedestal. I was able to have the the pieces cut at my local Lowes store. After making the pedestal I would make a few adjustments to make it more sturdy. I would attach the four posts to the inside corners and cut the bottom platform corners to fit around the posts instead of attaching them to the platform with brackets. I made my posts a little taller too because my laundry baskets were taller. I love my new addition to my laundry room! The link to Saushas Laundry Pedestal that I followed is here, http://ana-white.com/printpdf/2011/01/sausha’s-washerdryer-pedestals.

Estimated Cost
$75
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Painted
Recommended Skill Level
Intermediate

Floating Shelves Shoe Storage

Submitted by Anonymous (not verified) on Wed, 01/20/2016 - 18:43

I needed a way to get my shoes off of the floor, but wanted to store my shoes in a way that was easy to see and easier to retrive.  As you can see I have VERY limited space.  I found Ana's plans for floating shelves and ran with it, adapting it to fit my need.  After this picture was taken, I have added a piece of lauan to each shelf to complete project.  Hopefully someone can take this idea and adapt it to your needs as well!

Built from Plan(s)
Easy to Build Floating Shelves
Estimated Cost
Maybe $20 - $30
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
None - I like how wood looks
Recommended Skill Level
Beginner

Simple Writing Desk

Submitted by Chuck1979 on Wed, 06/19/2019 - 14:41

Love making this simple writing desk for my daughter!

Blog Link
https://youtu.be/BggSHFORgdU
Built from Plan(s)
Simple Writing Desk with Drawer
Estimated Cost
$100
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
White semi-gloss paint, dark walnut danish oil
Recommended Skill Level
Intermediate

Comments

sectional and chairs!

Submitted by Anonymous (not verified) on Mon, 04/03/2023 - 13:57

my husband and I used your plans for the sectional, end tables and chairs I made the pillows thanks so much for the designs we love them

Built from Plan(s)
2x4 Outdoor Chair
One Arm 2x4 Outdoor Sofa - Sectional Piece
Essential Wood Outdoor Chair Frame for Deep Seat Cushion

Comments

Tryde Coffee Table with shelf

Submitted by Snipes on Thu, 12/15/2011 - 09:51

I built this coffee table for a friend. It is a square version of the Tryde coffee table with a shelf underneath. The dimensions of the tabletop are 42" x 42." It took a couple of weeks of working at night to complete, but she loved it.

Built from Plan(s)
Tryde Coffee Table
Estimated Cost
$125
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
I used a Minwax Early American Stain with a coat of satin wipe-on polyurethane and 2 coats of satin spray polyurethane over that. I distressed the table a little with a chain, drill bits, hammer, etc.
Recommended Skill Level
Intermediate

Farmhouse Table

Small Farmhouse table with custom made husky legs and side trim. I used my router to create the legs and trim.It was my first attempt at turned legs. I used minwax white wash pickle, then I went over with a mixture of minwax of dark walnut and golden oak.

Built from Plan(s)
Small Square Modern Farmhouse Table
Husky Farmhouse Table
Finish Used
minwax white wash pickle, then a mix dark walnut and golden oak, polycrylic
Recommended Skill Level
Advanced

Comments

Val Manchuk

Thu, 11/07/2013 - 08:18

Great job on those turned legs! That table looks beautiful!

Val
artsybuildinglady.blogspot.ca

JoanneS

Thu, 11/07/2013 - 12:23

Your table looks awesome! What an amazing job you did turning the legs, and the finish is fab! Beautifully done!

Bedroom Remodel

Submitted by Anonymous (not verified) on Thu, 01/21/2016 - 18:35

We had 2 empty closets in our 100 year old home. The custom shelves took a day to build and have worked amazingly for our organization.

Blog Link
self-confidentmom
Built from Plan(s)
Simple Closet Organizer
Estimated Cost
$200
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Starter Project

Miter saw cart modified

I have enjoyed my miter saw cart for years. My sweet hubby gifted me with a table saw but I was nervous to use it without support for large pieces of wood and needed better storage. So... I modified my cart by adding a back leaf and making the shelf adjustable with two sets of cleats for the height of both saws.

Built from Plan(s)
Miter Saw Cart
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Discounted paint from the oops cart at Home depot.
Recommended Skill Level
Beginner

Comments

Library Console Table for cookbooks

Submitted by russ.roske on Sun, 04/09/2023 - 14:53

We needed storage for all of our cookbooks, so I built this from your Library Console Table plan. I painted it to match our kitchen cabinets and added a cherry top to match our floors. I re-used some shelving boards we had to make the boxes, so they now have a new life! Thanks for the plan!

Built from Plan(s)
Library Console Table

Comments

Raised Tile-Topped Pet Feeder

Submitted by Joni on Mon, 12/19/2011 - 11:00

I modified the single bowl raised pet feeder by adding tile over hardibacker cement board (over the wood platform). Then, I trimmed it with a thin border of wood. These are pretty addictive to make, as you can see from the pictures!

Finish Used
On the white version, I simply used white acrylic craft paint. On the stained versions, I used a mixture of Minwax water-based stains using Antique Walnut & Onyx, topped with 4 coats of General Finish Satin EnduroVar.
Recommended Skill Level
Beginner

Comments

BrennaLiz

Mon, 12/26/2011 - 13:12

I love the tile look you used! I have been looking everywhere for attractive raised pet bowls and have found nothing I like. I do have a few questions: is the cement board necessary? What size and type of wood did you you use for the trim and how did you attach it?

Thank you for posting I would have never thought of this myself!

Joni

Wed, 01/04/2012 - 12:59

Thanks for the feedback. According to the guys at Lowe's, you could skip the cement board and use liquid nails to attach the tiles. But the grout/adhesive that I was using would not bond to wood (and I think that may be true for many, if not all of them), so I went ahead with the cement board. This required a special drill bit for my roto-zip (to make the circle), and a special drill bit for my screwdriver (in connecting the cement to the board). I used "craft wood" trim (available at Lowe's in Pine). It's 3/8" thick and 1 1/2" wide. It's the perfect size for covering a 3/4" frame, cement board and the tile. I glued the boards together and then nailed thin brads in to secure it.

katieevans140@… (not verified)

Fri, 03/02/2012 - 20:11

Hi. I love your post! Did you lay the tile and then cut it or cut the holes first? What tools do you need to cut the tile?

Thanks,
Katie

Joni

Sun, 03/04/2012 - 10:38

Katie, I didn't have a tile cutter. I purchased a tile nipper from Lowe's, and was surprised at how easy it is to snip off the parts you don't want. I nipped it first and got it all laid out around the circular hole prior to putting the adhesive down. It helps to put the tile pieces in a vice, and then nip it. -Joni

calli (not verified)

Fri, 03/16/2012 - 10:11

this is awesome. our great dane has a massive drool issue (to be expected) so i've been trying to find a plan that isn't JUST wood top. problem solved. i think i just found my new christmas present gifting tradition too! thanks!

Picnic Table and Benches

Submitted by proach55 on Sun, 11/10/2013 - 10:53

Picnic table and benches from an original (as far as I know) design I copied from my father-in-law. It is roughly 4'x4' and can comfortably seat 8 people, and is very sturdy.

Estimated Cost
$200
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate