Community Brag Posts

This was my first table - I added extensions by notching out the end 2x4's and making extensions that slide into the pockets. There were a few mistakes I made that will be corrected when I build my next.
I modified the length of the table down to 5 feet long, but with the extensions in it goes up to 8'. The table is also 34" tall due to a giant husband and Great Dane. The chairs were likewise modified in height and I made the backs a bit fancier using 1x2's and a nail gun.

Dark walnut finish

I made something quite similar to the plan you suggested.
I onlychanged the top of the table diagonally.
Thank you very much Ana

I've loved doing some custom signs lately. Since I didn't have anymore reclaimed plywood I let my boyfriend Kreg Jig do the work joining some boards together, and let me angle grinder do all the damage.

We started using the plans from the site while modifying some dimensions to best fit our space. To reduce the guesswork in aligning the drawers and drilling the dowel holes, we routered a slot in the side of the drawer (shown in the pictures) then drilled a 1/2'' hole in the inside of the frame to insert the dowel. Doing this allows us to easily insert and remove the drawers for adjustment or cleaning.

We attached nylon straps to the bottom of the bin to hide them and used some hardwood plywood to completely cover the back.

I made this sawhorse desk for my 11 year old daughter's room makeover. It's a nice, simple plan that was fast to cut and assemble. I would trim the top of the saw horse legs to be under 24 inches to make sure it completely fits under the desk top. I may add a backsplash type backing.

My friend and I built this out of white pine, using plans from here. We threw our own changes and special touches on it and used the fridge plans to build a pantry also. We painted it yellow, and used vintage inspired and cupcake fabric prints. I also found a miniature ice cream parlor set on Craigslist. I painted to table top and we upholstered the seats with the same cupcake fabric. A few kitchen accessory kits and VIOLA! My girls LOVE this and it cost under $200 to build. I would recommend building over buying ANYTIME you can! Thank you Ana White and my friend for making my girls' Christmas the best yet!

My Sister thought this table would be a perfect edition to her new Farm House styled home that she was building. My sister asked a local wood turner if he had any old chunky legs sitting around...and he did! He sold these beauties to her for $20/each, steal of a deal.
We followed the Husky Farmhouse Table plan except with a few modifications. We used 5x 2″x8″x72″ pine boards instead of the 2″x6″ boards. I thought it was necessary to add some supports to stiffen up the table top, so we cut 3 pieces of 2″x4″ about 25″ long and glued and screwed those boards into the underside of the table top.
Next we substituted 1″x4″ furring strip board for the 2″x4″ skirt and eliminated the 1″x2″ trim and put a cute routed bead around the skirt. Since the table legs are round at the top instead of square, we changed the skirt attachment and screwed the legs to the table top. We cut the skirt boards to fit and screwed them in place.
The table turned out gorgeous, my sister adorned this table with fun ombre chairs. Thanks Ana for the plan.

FYI: tutorial for the silver travertine herringbone floors on blog:-)

Outdoor sectional.  Modified the sectional piece to be 48" rather than 72" as in plans.

Twin Farmhouse Storage Bed With Hinged Footboard.
After making a queen-size for myself, I built this twin-sized version for my niece. Along with a "Breakfast at Tiffany's inspired" theme, she got a new bed and a new bedroom for her 15th birthday.
For this version of the bed, I made just one storage cubby because it sits against a wall. With the addition of the hinged footboard, she has a secret vault for storing her Super Secret Teen items (or shoes or snowboards). I followed the traditional farmhouse bed design, omitting one 1x6 in the head/footboard panels. This way, it is not as wide and the storage cubby meets the bedpost on center.
(Again, my daughter modeling the hinging action).

Had hubby build this for my craft room over the holiday break. I have been looking for something to cut fabric on and help with some storage needs. I could not bring myself to pay the amount of money for some of these prefab MDF tables and or an arm or leg for one made out of some type of wood. He bought all of the wood and completed all of the cuts in one day. He spent another day putting it together and finished up the trim on the third day. It is currently set up in my sewing room and waiting for a fresh coat of paint. It looks great and will be perfect!

Ana White's plans came through again, easy to understand, I made drawers in one side for more storage, thank you!

Cathy B

For my daughter's birthday I made her this table and chairs. Despite being very easy and cheap to make, they are very sturdy. I've sat at that table quite a few times with no issues at all. I love how they turned out.

Hubby followed the plans exactly, using cheap whiteboard from Lowe's. I stained using Minwax dark walnut and a water-based Minwax poly with a matte finish. I would only use this kind of wood again if I were painting the project. It is hard to stain and my options were limited, because the wood doesn't take stain well. Love how "pottery barn" it ended up coming out, though!

This was my second project when I took up woodworking. It's the pocket hole version and I couldn't be happier with the results!

My wife went shopping one day in a primitive furniture shop and found this saltbox house that she loved. So I decided to get a picture of this house and build it myself. This project was a lot easier than I thought it would be. Hope you enjoy.