Husband built the loft bed plans for our oldest daughter. She said this was he was the best dad in the world!
Built this bunk bed for my two boys. Used the sweet pea storage stairs plan as a starting point and altered things from there to suit. The wall is just 3/8 plywood cut into planks and painted various colours.
For my son's new black lab pup. Started with rough cut maple.
I have tried all sorts of nest boxes. No one ever used them. I decided to make the one from Anna White's site. I used joinery to attach the various pieces. The best thing of all: I find girls sitting in the boxes and take eggs from them. It really is awesome. I got a photo with real eggs and you can also see the wooden eggs to entice them to try it out. Thank you so much! I will build another one for the other side of the the wall.
Fri, 04/21/2023 - 10:18
Love the fresh eggs, looks like a win to me! Thanks for sharing.
My father in law and I built this kitchen set for my two daughters, ages 3 yrs and 9 months. It was so fun to work with my father in law. I have built a few things before (table, chairs, doll bed, etc.) but nothing of this quality or magnitude. He is a great woodworker and knows how to do all the neat finishing touches that just make the project look really professional. I learned a ton working with him and had a blast!
I was inspired by Ana's kitchen sets and used a combo of then and the Lowes plans and I was very happy with how it turned out. I changed a few things: put two doors under the sink, made "gas" burners instead of "electric", used half the sink cabinet top for the sink and left the other half for counter space, added a clock to the stove, made the oven door open down.
The sink is a food service warming pan 1/4 size and the faucet came from Wal-Mart for $10. I will probably replace it with a nicer one from the ReStore when I get a chance
Break down of costs:
Lumber: $100
Hinges and pulls: $40
Paint and primer: $45
Burners: $20
Sink: $24
Mon, 12/26/2011 - 12:33
What a beautiful kitchen! I love the burners! And the warming drawer! Thank you for sharing.
Mon, 12/26/2011 - 13:09
Holy cow! Fantastic job! You guys really pulled it together and I really love the creative use of hardware, etc.
Wed, 12/28/2011 - 07:50
Thanks guys! Only problem is that my girls use it so much, I only get a chance to play with it when they go to bed! :)
Wed, 02/29/2012 - 10:03
Sorry I didn't see your comment sooner - I made the burners with craft wood circles and squares and 1/2 inch pieces of wood. I notched the ends over the circle with a chisel.
Took a 3 day weekend to put this together. We used biscuit joiner so that we wouldn't have any gaps in the top. Left the back open so our consoles could breath in their little spots. Modified the plans so it's only 4 foot long and fits perfectly under our TV.
Helped my friend make these cute night stands over two weekends (one Saturday each)
A few tips: Make sure the wood is the same size (* 1 inch)
Using the Kreg Jig, we attached all the sides together using 1 inch screws
The second one turned out better from the first...I guess we learned a few things!
Thanks Ana White! You rock!!
Ever since we moved into our current home, our master bedroom headboard has been at the top of our my project list. I knew I wanted a beautiful farmhouse style headboard. What I didn’t want was the heavy retail price tag. I searched high and low at places like Target, Wayfair, Amazon and even Walmart without finding an affordable option for us.
There is this perfect vantage point of our bedroom from the glider in my son’s room. I remember staring at that empty wall space above our bed for years, it felt like, while rocking our son to sleep. Just willing a headboard to appear. I wanted it so bad I could taste it. Something about looking at that same view, night after night, and waiting, waiting, waiting for it to happen just makes me appreciate it so much more now that it’s here, as so often happens in life.
This project inevitably got put on hold over the years after one thing or another got in the way. Either we didn’t have the time to devote to it, or we always had something else to put our money into. Untilllll I stumbled across Ana White’s Farmhouse Headboard Plans.
I used the stick on drawer organizer tutorial to divide a giant dresser drawer
With the divider, the drawer can hold more and is so much neater and easier to use
i love there is ZERO planning or sourcing of dividers with this method just have the basic materials on hand, open up a drawer and get it done
This is my first completed project from Ana's website!! I used a 1x3 around the picture and then a 1x2 for the trim. I bought a corner clamp to hold the corners together while I nailed.
The picture I made it for is 17" x 14 1/4" so I just took off 1/4" all the way around the picture to measure the length and width of the frame.
I think it turned out pretty good, but there were a few things that didn't turn out as planned. I didn't wipe up the glue that seeped out of the cracks good enough, and so my stain has a few "unstained" areas. Also, my last piece of trim didn't fit very well, so I had to cut another one that fit better.
Since this is my first project, I'm pretty proud of the way it turned out :)
Kids Stool. Not the hardest project, but a fun one.
I am so happy with how the paint job turned out. Did the support boards yellow to look like his utility belt. And the Leg have accented Blue like his gloves/boots.
My wife painted the logo on after tracing the pattern. She did an amazing job.
The top isn't one piece, because I didnt have a thick enough piece that was 13" in diameter. So its actually three boards from an old pallet, glued and pocket hole screwed together.
Buit this for our master bedroom.
I used the Modern Park Bench plans and modified the size for our patio space. I also modified the bottom and used 2x2’s to give it a different look.
Here are the pictures from the finished Banquette. Thank you for the free plans. Very much appreciated.
by Jason
Inspired by Ana's Pull-out Cabinet Drawer Organizer I made pull-out drawers for all of my lower cabinets and for my pantry cabinet. My pantry cabinet is 22" deep which makes it very easy to eventually come across soup that expired four years ago, or to find three bags of sugar when I thought I was out. The pull-out drawers make it so easy to access and organize everything in the cabinets. Absolutely love them! In the organizing spirit I also made spice racks for the cabinet doors and hangers for measuring cups/spoons. The hardest part for me was installing the drawer slides - they have to line up perfectly!
Tue, 01/03/2012 - 09:22
That looks so good! What a great way to start the New Year!
Tue, 01/03/2012 - 10:10
Looks great! I've been thinking of doing the same thing myself, I just need to get motivated and convince myself that I won't be "destroying" my kitchen cabinets if I screw in a few drawer slides.
Tue, 01/03/2012 - 13:58
Not only will you not be destroying them - you will be amazed at the increased organization and convenience! Putting away/getting out dishes and pans is so much easier and organizing the pantry is awesome!
Tue, 01/03/2012 - 14:20
Just one bit of advice for future projects, concerning drawer construction. It's better to have the sides come out to the front, rather than stop at the drawer front, and run the screws/pins through the side and into the front.
Another option, if you own a router, table saw or rabbet plane, is to cut a rabbet into the fronts and pin or screw through there, so you still show a solid front, but have the security of pinning through the sides.
Tue, 01/03/2012 - 17:02
Great job on organizing! It looks really nice - I'm adding these to my to-do list (which is now a mile long LOL).
Wed, 01/18/2012 - 11:01
I'd love to know the savings by doing it yourself as opposed to buying them somewhere. I'm in the research phase of our home organization project and trying to plan everything out!
Sat, 01/21/2012 - 05:00
Teresa, there's no way to make useful plans for this, because your cabinets are most likely a different size than the original builder's cabinets. That doesn't mean you can't build these though.
The hanging hook racks are trivial. Cut a strip slightly less than the width of the opening in the cabinet face frame, attach hooks as desired, and then attack to the doors, making sure to mount them level and inside the opening.
Drawers are slightly more involved, but not much. Buy the drawer slides first, because they will determine how much clearance you need. Typical clearance is 1/2" on each side, for a total of 1", but there's no solid rule.
Once you have the slides, build a set of boxes as deep as your cabinets and as wide, minus the necessary clearance. There are plenty of different ways to build drawers. Any good furniture construction book will discuss ways to do it. There is even a whole book on the topic.
You'll mount the slides and then put the drawers in. Kreg makes a nice jig you can use to mount the drawer glides. You can order the jig and the glides from Rockler.
Sun, 01/22/2012 - 20:15
Thanks for the advice. I have just purchased the Kreg master kit and can hardly wait to get started on this. Although hubby has told me first I had to build him a set of corner shelves for his collection. This will be my first project with drawers so I am a bit apprehensive, but still going to try.
I do have one more question though. My cabinet drawers seem to not have alot of support. You can push down on the center and it gives. Should I take those out and reinforce them before I start?
Thanks to everyone here, as there always seems to be someone willing to help out, and also thanks to Ana for this site.
Mon, 01/23/2012 - 04:37
A lot of commercial drawer bottoms are made out of very cheap material. You can make better bottoms out of hardboard or luan, and if the drawers are going to be holding heavier items like pans, you can build bottoms out of 1/4" plywood.
It's very hard to change the bottoms out of an existing drawer. For a strong drawer bottom, it needs to ride in a groove on the sides and front. If the existing bottoms ride in grooves on the three sides, you can probably pull the securing nail out of the back and replace the existing bottom, if you have replacement material that will fit in the existing groove. Otherwise, you'll need to build a new drawer with grooves sized for the bottoms you have.
Mon, 01/23/2012 - 21:09
Teresa -
I don't know why the link above doesn't work, but if you will go to Ana's home page and do a search for Wood Pullout Cabinet Drawer Organizer, that is the basic plan that I used, just changing the measurements to fit my cabinets. They were very easy to make, the hardest part being sure to get the drawer slides even on both the drawer and the cabinet, but that just takes patience and adjusting. Good luck with it - you can do it!
Tue, 01/24/2012 - 09:30
@Sarah - I saw where you had a question about the price of making the cabinet drawers. I have seen them priced anywhere from $35 a drawer on up. Most of mine are made of 1x4's and the pricing is as follows. A 1x4x8 at my local lumber yard is $3.29 and that will make one drawer. A sheet of 4x8 1/4" luan is $11.49 and that will make bottoms for 8 drawers. A 2x2x8 is less than $2.00 and that will make rails for the slides for 2 drawers, so that would be about $6.00 for one drawer plus $6.00 for the slides, total of $12.00. On the drawers for my pots and pans or anything heavy I used 3/8" plywood which would be slightly higher. Hope this helps!
Dolores
This is the first in a series of crates I’m building for my Expedit. It’s made from wood from the scrap pile behind our garage, so it cost nothing for the wood. It set me back fifty cents for the handle, which I sprayed with chalkboard paint. I plan to make six, but ideally I would fill all sixteen cubes up. I was totally inspired by Vicki from Made at This Place, with her Chalkboard Produce Crates for her Expedit. Thanks Vicki!
Wed, 11/20/2013 - 01:42
This looks great! I could use some of these in every room! The handle is a great touch, and I like how you did the inside corners - it will be really sturdy! Definitely putting this on my 'to-do' list!
Thu, 11/21/2013 - 08:58
Thank you Joanne!
These crates will definitely solve some storage issues! And it doesn't get much better than building on the cheap!
Val
artsybuildinglady.blogspot.ca
Made using knotty pine.
I used HD pocket screws and glued all top pieces except for the breadboard ends, to allow for wood swelling/contracting.
I needed a shoe rack that would work for our limited space and the Laundry Tower that was on the brag post caught my eye. It was modified from the Open Frame Laundry Basket Organizer. This shoe rack is working great for our family now! Thanks for this community!
Sat, 05/06/2023 - 21:09
Thanks for sharing your project, it looks really great!
Hallelujah!! Finally, somewhere to store all our alcohol-related necessities :) We adapted Ana's Benchmark Storage Unit to work as a liquor cabinet. We kept the basic design the same, but added some stemware storage across the top (a feature we loved in a Crate and Barrel liquor cabinet that was $$$$$) and some decorative molding to bulk it up a little bit. We lovvvvvve it! Thanks Ana!
PS: everyone please check out our blog for more details on this and other projects!
Thu, 01/05/2012 - 17:18
Wow, that is so awesome! I'm gonna have to build one now!
I had inherited some bed frame wood from our local Re-store and have been working it into projects here and there. We needed some actual night stands and I loved the look of the Reclaimed Look Wood Nightstand, but they were a little too tall for our bed. The height of the original plan is 28" and I ended up taking out one drawer for a total height of 20". I also found two sets of drawer slides at the Re-store and decided that an open shelf on the bottom would better suit our needs, so I crossed the reclaimed plan with the farmhouse plan to create a shelf on the bottom. The bottom is built the same way that the sides are, but attached so that the 2x2 is on the underside.
I didn't have enough wood from the bed frame to make two full tables, so I used Douglas fir 2x2's for the legs (the best the local big box home improvement had that day for my price) and white board for the table tops and every other board for the sides and shelves. This was my second real building project, so they were really easy to put together, but it was a lesson in making everything super square because of the drawer slides. The finish I used also goes great with a 130 year old dresser that you can see a bit of next to the finish table. The wood only needed one coat to reach the color closest to that dresser and it hid the fact that I used three different types of wood in this project. Overall they are just what we needed in this space. The bed frame is IKEA, but I am thinking about making the Reclaimed Look Bed Frame to match the tables in the future.
Comments
jbyler
Fri, 12/23/2011 - 09:20
Jessica
We are so excited to complete this project for our oldest, but of course the middle child is wanting a bunk bed too-guess we'll be building one of those soon.